diff --git a/agc_2-X/branches/agc_2.0.4/UPGRADE b/agc_2-X/branches/agc_2.0.4/UPGRADE
index 7af46c87..42196711 100644
--- a/agc_2-X/branches/agc_2.0.4/UPGRADE
+++ b/agc_2-X/branches/agc_2.0.4/UPGRADE
@@ -4,6 +4,34 @@ NOTE: Upgrading from 2.0.2 to 2.0.3 is below the first section
 NOTE: Upgrading from 2.0.1 to 2.0.2 is in the middle section
 NOTE: Upgrading from 1.1.12-3 to 2.0.1 is at the bottom
 
+########## UPGRADING FROM 2.0.4 TO 2.0.4.1 ##########
+
+1. install new files:
+	perl ./install.pl
+	NOTES: If you have customized any scripts in the bin or agi folders, 
+	then make sure you back them up before running the install.pl script. 
+	This script will replace existing files in the astguiclient installation.
+
+2. NO DATABASE UPDATES NEEDED FROM 2.0.4 RELEASE
+
+3. Audio recording mixing/compression/ftping scripts have been completely
+	rewritten and separated into different scripts for better fault
+	tolerance. Also, you have the option of compression in to the following
+	formats: WAV, GSM, MP3 and OGG
+	- AST_CRON_audio_1_move_mix.pl
+	- AST_CRON_audio_1_move_VDonly.pl
+	- AST_CRON_audio_2_compress.pl
+	- AST_CRON_audio_3_ftp.pl
+
+4. Created a new script to backup a VICIDIAL setup, including the Asterisk conf
+	files, prompt recordings, bin, agi and web files:
+	ADMIN_backup.pl
+
+5. Several bug fixes in agent logging and Remote Agents functions
+
+6. Added ip_relay to allow for loopback IAX trunks that make true blind monitoring possible for all agents no matter their phone type 0860XXXX.
+
+
 ########## UPGRADING FROM 2.0.3 TO 2.0.4 ##########
 
 1. install new files:
diff --git a/agc_2-X/branches/agc_2.0.4/agi/agi-record_prompts.agi b/agc_2-X/branches/agc_2.0.4/agi/agi-record_prompts.agi
index c54d0643..8b1c4558 100644
--- a/agc_2-X/branches/agc_2.0.4/agi/agi-record_prompts.agi
+++ b/agc_2-X/branches/agc_2.0.4/agi/agi-record_prompts.agi
@@ -1,13 +1,18 @@
 #!/usr/bin/perl
 #
-# agi-record_prompts.agi version 0.2
+# agi-record_prompts.agi version 2.0.4.1
 #
 # for recording prompts to GSM file over the phone
 # Saves recordings with 8-digit filenames to be played when exten is dialed
 #
-#	; prompt recording AGI script, ID is 4321
+#	; prompts for recording AGI script, ID is 4321
+#   ; first variable is format (gsm/wav)
+#	; second variable is timeout in milliseconds (default is 360000 [6 minutes])
+#	exten => 8167,1,Answer
+#	exten => 8167,2,AGI(agi-record_prompts.agi,wav-----360000)
+#	exten => 8167,3,Hangup
 #	exten => 8168,1,Answer
-#	exten => 8168,2,AGI(agi-record_prompts.agi)
+#	exten => 8168,2,AGI(agi-record_prompts.agi,gsm-----360000)
 #	exten => 8168,3,Hangup
 #
 #	; playback of recorded prompts
@@ -24,12 +29,34 @@
 #	- vm-msgsaved
 #	- vm-goodbye
 #
+# Copyright (C) 2008  Matt Florell <vicidial@gmail.com>    LICENSE: GPLv2
+#
+# CHANGELOG
+# 71226-1303 - Added option to change format GSM/WAV and timeout through flags
+#
 
 $US='_';
 
 use Asterisk::AGI;
 $AGI = new Asterisk::AGI;
 
+### begin parsing run-time options ###
+if (length($ARGV[0])>1)
+{
+	$i=0;
+	while ($#ARGV >= $i)
+	{
+	$args = "$args $ARGV[$i]";
+	$i++;
+	}
+	
+	### list of command-line array arguments:
+	@ARGV_vars = split(/-----/, $ARGV[0]);
+
+	$format = 	$ARGV_vars[0];
+	$timeout = 	$ARGV_vars[1];
+}
+
 $|=1;
 while(<STDIN>) {
 	chomp;
@@ -46,6 +73,10 @@ while(<STDIN>) {
 
 }
 
+if ($format =~ /WAV/i) {$format = 'wav';}
+else {$format = 'gsm';}
+
+if ($timeout < 1) {$timeout = 360000;} # default is 6 minutes
 
 $unique_id_out = $unique_id;
 @NEW_ID = split(/\./, $unique_id_out);
@@ -162,7 +193,7 @@ $AGI->stream_file('beep');
 $digit='';
 $interrupt_digit='';
 
-$interrupt_digit = $AGI->record_file("$session_recording", 'gsm', '123456789*#', 360000, 1);
+$interrupt_digit = $AGI->record_file("$session_recording", "$format", '123456789*#', "$timeout", 1);
 
 	print STDERR "interrupt_digit |$interrupt_digit|\n";
 
diff --git a/agc_2-X/branches/agc_2.0.4/bin/ADMIN_backup.pl b/agc_2-X/branches/agc_2.0.4/bin/ADMIN_backup.pl
new file mode 100644
index 00000000..526529d4
--- /dev/null
+++ b/agc_2-X/branches/agc_2.0.4/bin/ADMIN_backup.pl
@@ -0,0 +1,315 @@
+#!/usr/bin/perl
+#
+# ADMIN_backup.pl    version 2.0.4
+#
+# DESCRIPTION:
+# Backs-up the asterisk database, conf/agi/sounds/bin files 
+#
+# Copyright (C) 2008  Matt Florell <vicidial@gmail.com>    LICENSE: GPLv2
+#
+# CHANGELOG
+#
+# 80316-2211 - First Build
+# 80317-1609 - Added Sangoma conf file backup and changed FTP settings
+# 80328-0135 - Do not attempt to archive /etc/my.cnf is --without-db flag is set
+#
+
+
+$secT = time();
+$secX = time();
+($sec,$min,$hour,$mday,$mon,$year,$wday,$yday,$isdst) = localtime(time);
+$year = ($year + 1900);
+$mon++;
+if ($mon < 10) {$mon = "0$mon";}
+if ($mday < 10) {$mday = "0$mday";}
+if ($hour < 10) {$Fhour = "0$hour";}
+if ($min < 10) {$min = "0$min";}
+if ($sec < 10) {$sec = "0$sec";}
+$file_date = "$year-$mon-$mday";
+$now_date = "$year-$mon-$mday $hour:$min:$sec";
+$VDL_date = "$year-$mon-$mday 00:00:01";
+
+### begin parsing run-time options ###
+if (length($ARGV[0])>1)
+{
+	$i=0;
+	while ($#ARGV >= $i)
+	{
+	$args = "$args $ARGV[$i]";
+	$i++;
+	}
+
+	if ($args =~ /--help/i)
+	{
+	print "allowed run time options:\n";
+	print "  [--all] = *DEFAULT* show GMT offset of records as they are inserted into hopper\n";
+	print "  [--db-only] = only backup the database\n";
+	print "  [--conf-only] = only backup the asterisk conf files\n";
+	print "  [--without-db] = do not backup the database\n";
+	print "  [--without-conf] = do not backup the conf files\n";
+	print "  [--without-web] = do not backup web files\n";
+	print "  [--without-sounds] = do not backup asterisk sounds\n";
+	print "  [--ftp-transfer] = Transfer backup to FTP server\n";
+	print "  [--debugX] = super debug\n";
+	print "  [--debug] = debug\n";
+	print "  [-t] = test\n";
+	exit;
+	}
+	else
+	{
+	if ($args =~ /--debug/i)
+		{
+		$DB=1; $FTPdebug=1;
+		print "\n----- DEBUG -----\n\n";
+		}
+	if ($args =~ /--debugX/i)
+		{
+		$DBX=1;
+		print "\n----- SUPER DEBUG -----\n\n";
+		}
+	if ($args =~ /-t/i)
+		{
+		$T=1;   $TEST=1;
+		print "\n-----TESTING -----\n\n";
+		}
+	if ($args =~ /--db-only/i)
+		{
+		$db_only=1;
+		print "\n----- Backup Database Only -----\n\n";
+		}
+	if ($args =~ /--conf-only/i)
+		{
+		$conf_only=1;
+		print "\n----- Conf Files Backup Only -----\n\n";
+		}
+	if ($args =~ /--without-db/i)
+		{
+		$without_db=1;
+		print "\n----- No Database Backup -----\n\n";
+		}
+	if ($args =~ /--without-conf/i)
+		{
+		$without_conf=1;
+		print "\n----- No Conf Files Backup -----\n\n";
+		}
+	if ($args =~ /--without-sounds/i)
+		{
+		$without_sounds=1;
+		print "\n----- No Sounds Backup -----\n\n";
+		}
+	if ($args =~ /--without-web/i)
+		{
+		$without_web=1;
+		print "\n----- No web files Backup -----\n\n";
+		}
+	if ($args =~ /--ftp-transfer/i)
+		{
+		$ftp_transfer=1;
+		print "\n----- FTP transfer -----\n\n";
+		}
+	}
+}
+else
+{
+print "no command line options set\n";
+}
+
+# default path to astguiclient configuration file:
+$PATHconf =		'/etc/astguiclient.conf';
+
+open(conf, "$PATHconf") || die "can't open $PATHconf: $!\n";
+@conf = <conf>;
+close(conf);
+$i=0;
+foreach(@conf)
+	{
+	$line = $conf[$i];
+	$line =~ s/ |>|\n|\r|\t|\#.*|;.*//gi;
+	if ( ($line =~ /^PATHhome/) && ($CLIhome < 1) )
+		{$PATHhome = $line;   $PATHhome =~ s/.*=//gi;}
+	if ( ($line =~ /^PATHlogs/) && ($CLIlogs < 1) )
+		{$PATHlogs = $line;   $PATHlogs =~ s/.*=//gi;}
+	if ( ($line =~ /^PATHagi/) && ($CLIagi < 1) )
+		{$PATHagi = $line;   $PATHagi =~ s/.*=//gi;}
+	if ( ($line =~ /^PATHweb/) && ($CLIweb < 1) )
+		{$PATHweb = $line;   $PATHweb =~ s/.*=//gi;}
+	if ( ($line =~ /^PATHsounds/) && ($CLIsounds < 1) )
+		{$PATHsounds = $line;   $PATHsounds =~ s/.*=//gi;}
+	if ( ($line =~ /^VARserver_ip/) && ($CLIserver_ip < 1) )
+		{$VARserver_ip = $line;   $VARserver_ip =~ s/.*=//gi;}
+	if ( ($line =~ /^VARDB_server/) && ($CLIDB_server < 1) )
+		{$VARDB_server = $line;   $VARDB_server =~ s/.*=//gi;}
+	if ( ($line =~ /^VARDB_database/) && ($CLIDB_database < 1) )
+		{$VARDB_database = $line;   $VARDB_database =~ s/.*=//gi;}
+	if ( ($line =~ /^VARDB_user/) && ($CLIDB_user < 1) )
+		{$VARDB_user = $line;   $VARDB_user =~ s/.*=//gi;}
+	if ( ($line =~ /^VARDB_pass/) && ($CLIDB_pass < 1) )
+		{$VARDB_pass = $line;   $VARDB_pass =~ s/.*=//gi;}
+	if ( ($line =~ /^VARDB_port/) && ($CLIDB_port < 1) )
+		{$VARDB_port = $line;   $VARDB_port =~ s/.*=//gi;}
+	if ( ($line =~ /^VARREPORT_host/) && ($CLIREPORT_host < 1) )
+		{$VARREPORT_host = $line;   $VARREPORT_host =~ s/.*=//gi;}
+	if ( ($line =~ /^VARREPORT_user/) && ($CLIREPORT_user < 1) )
+		{$VARREPORT_user = $line;   $VARREPORT_user =~ s/.*=//gi;}
+	if ( ($line =~ /^VARREPORT_pass/) && ($CLIREPORT_pass < 1) )
+		{$VARREPORT_pass = $line;   $VARREPORT_pass =~ s/.*=//gi;}
+	if ( ($line =~ /^VARREPORT_port/) && ($CLIREPORT_port < 1) )
+		{$VARREPORT_port = $line;   $VARREPORT_port =~ s/.*=//gi;}
+	if ( ($line =~ /^VARREPORT_dir/) && ($CLIREPORT_dir < 1) )
+		{$VARREPORT_dir = $line;   $VARREPORT_dir =~ s/.*=//gi;}
+
+	$i++;
+	}
+
+if (!$ARCHIVEpath) {$ARCHIVEpath = "$PATHlogs/archive";}
+if (!$VARDB_port) {$VARDB_port='3306';}
+
+### find tar binary to do the archiving
+$tarbin = '';
+if ( -e ('/usr/bin/tar')) {$tarbin = '/usr/bin/tar';}
+else 
+	{
+	if ( -e ('/usr/local/bin/tar')) {$tarbin = '/usr/local/bin/tar';}
+	else
+		{
+		if ( -e ('/bin/tar')) {$tarbin = '/bin/tar';}
+		else
+			{
+			print "Can't find tar binary! Exiting...\n";
+			exit;
+			}
+		}
+	}
+
+### find gzip binary to do the archiving
+$gzipbin = '';
+if ( -e ('/usr/bin/gzip')) {$gzipbin = '/usr/bin/gzip';}
+else 
+	{
+	if ( -e ('/usr/local/bin/gzip')) {$gzipbin = '/usr/local/bin/gzip';}
+	else
+		{
+		if ( -e ('/bin/gzip')) {$gzipbin = '/bin/gzip';}
+		else
+			{
+			print "Can't find gzip binary! Exiting...\n";
+			exit;
+			}
+		}
+	}
+
+### find mysqldump binary to do the database dump
+$mysqldumpbin = '';
+if ( -e ('/usr/bin/mysqldump')) {$mysqldumpbin = '/usr/bin/mysqldump';}
+else 
+	{
+	if ( -e ('/usr/local/mysql/bin/mysqldump')) {$mysqldumpbin = '/usr/local/mysql/bin/mysqldump';}
+	else
+		{
+		if ( -e ('/bin/mysqldump')) {$mysqldumpbin = '/bin/mysqldump';}
+		else
+			{
+			print "Can't find mysqldump binary! Exiting...\n";
+			exit;
+			}
+		}
+	}
+
+$conf='_CONF_';
+$sangoma='_SANGOMA_';
+$linux='_LINUX_';
+$bin='_BIN_';
+$web='_WEB_';
+$sounds='_SOUNDS_';
+$all='_ALL_';
+$tar='.tar';
+$gz='.gz';
+$sgSTRING='';
+
+`cd $ARCHIVEpath`;
+`mkdir $ARCHIVEpath/temp`;
+
+if ( ($without_db < 1) && ($conf_only < 1) )
+	{
+	### BACKUP THE MYSQL FILES ON THE DB SERVER ###
+	`$mysqldumpbin --lock-tables --flush-logs $VARDB_database | $gzipbin > $ARCHIVEpath/temp/$VARserver_ip$VARDB_database$wday.gz`;
+	}
+
+if ( ($without_conf < 1) && ($db_only < 1) )
+	{
+	### BACKUP THE ASTERISK CONF FILES ON THE SERVER ###
+	`$tarbin cf $ARCHIVEpath/temp/$VARserver_ip$conf$wday$tar /etc/astguiclient.conf /etc/zaptel.conf /etc/asterisk`;
+
+	### BACKUP THE WANPIPE CONF FILES(if there are any) ###
+	if ( -e ('/etc/wanpipe/wanpipe1.conf')) 
+		{
+		$sgSTRING = '/etc/wanpipe/wanpipe1.conf ';
+		if ( -e ('/etc/wanpipe/wanpipe2.conf')) {$sgSTRING .= '/etc/wanpipe/wanpipe2.conf ';}
+		if ( -e ('/etc/wanpipe/wanpipe3.conf')) {$sgSTRING .= '/etc/wanpipe/wanpipe3.conf ';}
+		if ( -e ('/etc/wanpipe/wanpipe4.conf')) {$sgSTRING .= '/etc/wanpipe/wanpipe4.conf ';}
+		if ( -e ('/etc/wanpipe/wanpipe5.conf')) {$sgSTRING .= '/etc/wanpipe/wanpipe5.conf ';}
+		if ( -e ('/etc/wanpipe/wanpipe6.conf')) {$sgSTRING .= '/etc/wanpipe/wanpipe6.conf ';}
+		if ( -e ('/etc/wanpipe/wanpipe7.conf')) {$sgSTRING .= '/etc/wanpipe/wanpipe7.conf ';}
+		if ( -e ('/etc/wanpipe/wanpipe8.conf')) {$sgSTRING .= '/etc/wanpipe/wanpipe8.conf ';}
+		if ( -e ('/etc/wanpipe/wanrouter.rc')) {$sgSTRING .= '/etc/wanpipe/wanrouter.rc ';}
+
+		`$tarbin cf $ARCHIVEpath/temp/$VARserver_ip$sangoma$wday$tar $sgSTRING`;
+		}
+
+	if ($without_db < 1)
+		{
+		### BACKUP OTHER CONF FILES ON THE SERVER ###
+		`$tarbin cf $ARCHIVEpath/temp/$VARserver_ip$linux$wday$tar /etc/my.cnf /etc/hosts /etc/rc.d/rc.local /etc/resolv.conf`;
+		}
+	else
+		{
+		### BACKUP OTHER CONF FILES ON THE SERVER ###
+		`$tarbin cf $ARCHIVEpath/temp/$VARserver_ip$linux$wday$tar /etc/hosts /etc/rc.d/rc.local /etc/resolv.conf`;
+		}
+	}
+
+if ( ($conf_only < 1) && ($db_only < 1) && ($without_web < 1) )
+	{
+	### BACKUP THE WEB FILES ON THE SERVER ###
+	`$tarbin cf $ARCHIVEpath/temp/$VARserver_ip$web$wday$tar $PATHweb`;
+	}
+
+if ( ($conf_only < 1) && ($db_only < 1) )
+	{
+	### BACKUP THE ASTGUICLIENT AND AGI FILES ON THE SERVER ###
+	`$tarbin cf $ARCHIVEpath/temp/$VARserver_ip$bin$wday$tar $PATHagi $PATHhome`;
+	}
+
+if ( ($conf_only < 1) && ($db_only < 1) && ($without_sounds < 1) )
+	{
+	### BACKUP THE ASTERISK SOUNDS ON THE SERVER ###
+	`$tarbin cf $ARCHIVEpath/temp/$VARserver_ip$sounds$wday$tar $PATHsounds`;
+	}
+
+### PUT EVERYTHING TOGETHER TO BE COMPRESSED ###
+`$tarbin cf $ARCHIVEpath/$VARserver_ip$all$wday$tar $ARCHIVEpath/temp`;
+
+### REMOVE OLD GZ FILE
+`rm -f $ARCHIVEpath/$VARserver_ip$all$wday$tar$gz`;
+
+### COMPRESS THE ALL FILE ###
+`$gzipbin -9 $ARCHIVEpath/$VARserver_ip$all$wday$tar`;
+
+### REMOVE TEMP FILES ###
+`rm -fR $ARCHIVEpath/temp`;
+
+
+#### FTP to the Backup server and upload the final file
+if ($ftp_transfer > 0)
+	{
+	use Net::FTP;
+	$ftp = Net::FTP->new("$VARREPORT_host", Port => "$VARREPORT_port", Debug => "$FTPdebug");
+	$ftp->login("$VARREPORT_user","$VARREPORT_pass");
+	$ftp->cwd("$VARREPORT_dir");
+	$ftp->binary();
+	$ftp->put("$ARCHIVEpath/$VARserver_ip$all$wday$tar$gz", "$VARserver_ip$all$wday$tar$gz");
+	$ftp->quit;
+	}
+
+
+exit;
diff --git a/agc_2-X/branches/agc_2.0.4/bin/ADMIN_update_server_ip.pl b/agc_2-X/branches/agc_2.0.4/bin/ADMIN_update_server_ip.pl
index ad574cab..00891502 100644
--- a/agc_2-X/branches/agc_2.0.4/bin/ADMIN_update_server_ip.pl
+++ b/agc_2-X/branches/agc_2.0.4/bin/ADMIN_update_server_ip.pl
@@ -6,7 +6,7 @@
 # astguiclient.conf file to reflect a change in IP address. The script will 
 # automatically default to the first eth address in the ifconfig output.
 #
-# Copyright (C) 2007  Matt Florell <vicidial@gmail.com>    LICENSE: GPLv2
+# Copyright (C) 2008  Matt Florell <vicidial@gmail.com>    LICENSE: GPLv2
 #
 # CHANGELOG
 # 71205-2144 - added display of extensions.conf example for call routing
diff --git a/agc_2-X/branches/agc_2.0.4/bin/AST_CRON_audio_1_move_VDonly.pl b/agc_2-X/branches/agc_2.0.4/bin/AST_CRON_audio_1_move_VDonly.pl
new file mode 100644
index 00000000..267cee4d
--- /dev/null
+++ b/agc_2-X/branches/agc_2.0.4/bin/AST_CRON_audio_1_move_VDonly.pl
@@ -0,0 +1,208 @@
+#!/usr/bin/perl
+#
+# AST_CRON_audio_1_move_VDonly.pl
+#
+# This is a STEP-1 program in the audio archival process
+#
+# IMPORTANT!!! ONLY TO BE USED WHEN ONLY VICIDIAL RECORDINGS ARE ON THE SYSTEM!
+#
+# runs every 3 minutes and copies the -in recordings in the monitor to the DONE
+# directory for further processing. Very important for RAM-drive usage
+# 
+# put an entry into the cron of of your asterisk machine to run this script 
+# every 3 minutes or however often you desire
+#
+# ### recording mixing/compressing/ftping scripts
+##0,3,6,9,12,15,18,21,24,27,30,33,36,39,42,45,48,51,54,57 * * * * /usr/share/astguiclient/AST_CRON_audio_1_move_mix.pl
+# 0,3,6,9,12,15,18,21,24,27,30,33,36,39,42,45,48,51,54,57 * * * * /usr/share/astguiclient/AST_CRON_audio_1_move_VDonly.pl
+# 1,4,7,10,13,16,19,22,25,28,31,34,37,40,43,46,49,52,55,58 * * * * /usr/share/astguiclient/AST_CRON_audio_2_compress.pl --GSM
+# 2,5,8,11,14,17,20,23,26,29,32,35,38,41,44,47,50,53,56,59 * * * * /usr/share/astguiclient/AST_CRON_audio_3_ftp.pl --GSM
+#
+# make sure that the following directories exist:
+# /var/spool/asterisk/monitor		# default Asterisk recording directory
+# /var/spool/asterisk/monitorDONE	# where the moved -in files are put
+# 
+# This program assumes that recordings are saved by Asterisk as .wav
+# should be easy to change this code if you use .gsm instead
+# 
+# Copyright (C) 2008  Matt Florell <vicidial@gmail.com>    LICENSE: GPLv2
+#
+# 
+# 80302-1958 - First Build
+#
+
+### begin parsing run-time options ###
+if (length($ARGV[0])>1)
+{
+	$i=0;
+	while ($#ARGV >= $i)
+	{
+	$args = "$args $ARGV[$i]";
+	$i++;
+	}
+
+	if ($args =~ /--help/i)
+	{
+	print "allowed run time options:\n  [--debug] = debug\n  [--debugX] = super debug\n  [-t] = test\n\n";
+	exit;
+	}
+	else
+	{
+		if ($args =~ /--debug/i)
+		{
+		$DB=1;
+		print "\n----- DEBUG -----\n\n";
+		}
+		if ($args =~ /--debugX/i)
+		{
+		$DBX=1;
+		print "\n----- SUPER DEBUG -----\n\n";
+		}
+		if ($args =~ /-t/i)
+		{
+		$T=1;   $TEST=1;
+		print "\n-----TESTING -----\n\n";
+		}
+	}
+}
+else
+{
+#print "no command line options set\n";
+}
+
+
+# default path to astguiclient configuration file:
+$PATHconf =		'/etc/astguiclient.conf';
+
+open(conf, "$PATHconf") || die "can't open $PATHconf: $!\n";
+@conf = <conf>;
+close(conf);
+$i=0;
+foreach(@conf)
+	{
+	$line = $conf[$i];
+	$line =~ s/ |>|\n|\r|\t|\#.*|;.*//gi;
+	if ( ($line =~ /^PATHhome/) && ($CLIhome < 1) )
+		{$PATHhome = $line;   $PATHhome =~ s/.*=//gi;}
+	if ( ($line =~ /^PATHlogs/) && ($CLIlogs < 1) )
+		{$PATHlogs = $line;   $PATHlogs =~ s/.*=//gi;}
+	if ( ($line =~ /^PATHagi/) && ($CLIagi < 1) )
+		{$PATHagi = $line;   $PATHagi =~ s/.*=//gi;}
+	if ( ($line =~ /^PATHweb/) && ($CLIweb < 1) )
+		{$PATHweb = $line;   $PATHweb =~ s/.*=//gi;}
+	if ( ($line =~ /^PATHsounds/) && ($CLIsounds < 1) )
+		{$PATHsounds = $line;   $PATHsounds =~ s/.*=//gi;}
+	if ( ($line =~ /^PATHmonitor/) && ($CLImonitor < 1) )
+		{$PATHmonitor = $line;   $PATHmonitor =~ s/.*=//gi;}
+	if ( ($line =~ /^PATHDONEmonitor/) && ($CLIDONEmonitor < 1) )
+		{$PATHDONEmonitor = $line;   $PATHDONEmonitor =~ s/.*=//gi;}
+	if ( ($line =~ /^VARserver_ip/) && ($CLIserver_ip < 1) )
+		{$VARserver_ip = $line;   $VARserver_ip =~ s/.*=//gi;}
+	if ( ($line =~ /^VARDB_server/) && ($CLIDB_server < 1) )
+		{$VARDB_server = $line;   $VARDB_server =~ s/.*=//gi;}
+	if ( ($line =~ /^VARDB_database/) && ($CLIDB_database < 1) )
+		{$VARDB_database = $line;   $VARDB_database =~ s/.*=//gi;}
+	if ( ($line =~ /^VARDB_user/) && ($CLIDB_user < 1) )
+		{$VARDB_user = $line;   $VARDB_user =~ s/.*=//gi;}
+	if ( ($line =~ /^VARDB_pass/) && ($CLIDB_pass < 1) )
+		{$VARDB_pass = $line;   $VARDB_pass =~ s/.*=//gi;}
+	if ( ($line =~ /^VARDB_port/) && ($CLIDB_port < 1) )
+		{$VARDB_port = $line;   $VARDB_port =~ s/.*=//gi;}
+	if ( ($line =~ /^VARFTP_host/) && ($CLIFTP_host < 1) )
+		{$VARFTP_host = $line;   $VARFTP_host =~ s/.*=//gi;}
+	if ( ($line =~ /^VARFTP_user/) && ($CLIFTP_user < 1) )
+		{$VARFTP_user = $line;   $VARFTP_user =~ s/.*=//gi;}
+	if ( ($line =~ /^VARFTP_pass/) && ($CLIFTP_pass < 1) )
+		{$VARFTP_pass = $line;   $VARFTP_pass =~ s/.*=//gi;}
+	if ( ($line =~ /^VARFTP_port/) && ($CLIFTP_port < 1) )
+		{$VARFTP_port = $line;   $VARFTP_port =~ s/.*=//gi;}
+	if ( ($line =~ /^VARFTP_dir/) && ($CLIFTP_dir < 1) )
+		{$VARFTP_dir = $line;   $VARFTP_dir =~ s/.*=//gi;}
+	if ( ($line =~ /^VARHTTP_path/) && ($CLIHTTP_path < 1) )
+		{$VARHTTP_path = $line;   $VARHTTP_path =~ s/.*=//gi;}
+	$i++;
+	}
+
+# Customized Variables
+$server_ip = $VARserver_ip;		# Asterisk server IP
+if (!$VARDB_port) {$VARDB_port='3306';}
+
+use DBI;	  
+
+$dbhA = DBI->connect("DBI:mysql:$VARDB_database:$VARDB_server:$VARDB_port", "$VARDB_user", "$VARDB_pass")
+ or die "Couldn't connect to database: " . DBI->errstr;
+
+
+### directory where in/out recordings are saved to by Asterisk
+$dir1 = "$PATHmonitor";
+$dir2 = "$PATHDONEmonitor";
+
+ opendir(FILE, "$dir1/");
+ @FILES = readdir(FILE);
+
+$i=0;
+foreach(@FILES)
+   {
+	$size1 = 0;
+	$size2 = 0;
+
+	if ( (length($FILES[$i]) > 4) && (!-d $FILES[$i]) )
+		{
+
+		$size1 = (-s "$dir1/$FILES[$i]");
+		if ($DBX) {print "$FILES[$i] $size1\n";}
+		sleep(1);
+		$size2 = (-s "$dir1/$FILES[$i]");
+		if ($DBX) {print "$FILES[$i] $size2\n\n";}
+
+		if ( ($FILES[$i] !~ /out\.wav|out\.gsm|lost\+found/i) && ($size1 eq $size2) && (length($FILES[$i]) > 4))
+			{
+			$INfile = $FILES[$i];
+			$OUTfile = $FILES[$i];
+			$OUTfile =~ s/-in\.wav/-out.wav/gi;
+			$OUTfile =~ s/-in\.gsm/-out.gsm/gi;
+			$ALLfile = $FILES[$i];
+			$ALLfile =~ s/-in\.wav/-all.wav/gi;
+			$ALLfile =~ s/-in\.gsm/-all.gsm/gi;
+			$SQLFILE = $FILES[$i];
+			$SQLFILE =~ s/-in\.wav|-in\.gsm//gi;
+
+			$stmtA = "select recording_id from recording_log where filename='$SQLFILE' order by recording_id desc LIMIT 1;";
+			if($DBX){print STDERR "\n|$stmtA|\n";}
+			$sthA = $dbhA->prepare($stmtA) or die "preparing: ",$dbhA->errstr;
+			$sthA->execute or die "executing: $stmtA ", $dbhA->errstr;
+			$sthArows=$sthA->rows;
+			if ($sthArows > 0)
+				{
+				@aryA = $sthA->fetchrow_array;
+				$recording_id =	"$aryA[0]";
+				}
+			$sthA->finish();
+
+		if ($DB) {print "|$recording_id|$INfile|     |$ALLfile|\n";}
+
+			if (!$T)
+				{
+				`mv -f "$dir1/$INfile" "$dir2/$ALLfile"`;
+				`rm -f "$dir1/$OUTfile"`;
+				}
+			else
+				{
+				`cp -f "$dir1/$INfile" "$dir2/$ALLfile"`;
+				}
+
+			$stmtA = "UPDATE recording_log set location='http://$server_ip/RECORDINGS/$ALLfile' where recording_id='$recording_id';";
+				if($DBX){print STDERR "\n|$stmtA|\n";}
+			$affected_rows = $dbhA->do($stmtA); #  or die  "Couldn't execute query:|$stmtA|\n";
+
+			}
+		}
+	$i++;
+	}
+
+if ($DB) {print "DONE... EXITING\n\n";}
+
+$dbhA->disconnect();
+
+
+exit;
diff --git a/agc_2-X/branches/agc_2.0.4/bin/AST_CRON_audio_1_move_mix.pl b/agc_2-X/branches/agc_2.0.4/bin/AST_CRON_audio_1_move_mix.pl
new file mode 100644
index 00000000..734471b2
--- /dev/null
+++ b/agc_2-X/branches/agc_2.0.4/bin/AST_CRON_audio_1_move_mix.pl
@@ -0,0 +1,226 @@
+#!/usr/bin/perl
+#
+# AST_CRON_audio_1_move_mix.pl
+#
+# This is a STEP-1 program in the audio archival process
+#
+# runs every 3 minutes and copies and mixes the -in and -out recordings in the 
+# monitor to the DONE directory for further processing. Very important for 
+# RAM-drive usage
+# 
+# put an entry into the cron of of your asterisk machine to run this script 
+# every 3 minutes or however often you desire
+#
+# ### recording mixing/compressing/ftping scripts
+# 0,3,6,9,12,15,18,21,24,27,30,33,36,39,42,45,48,51,54,57 * * * * /usr/share/astguiclient/AST_CRON_audio_1_move_mix.pl
+##0,3,6,9,12,15,18,21,24,27,30,33,36,39,42,45,48,51,54,57 * * * * /usr/share/astguiclient/AST_CRON_audio_1_move_VDonly.pl
+# 1,4,7,10,13,16,19,22,25,28,31,34,37,40,43,46,49,52,55,58 * * * * /usr/share/astguiclient/AST_CRON_audio_2_compress.pl --GSM
+# 2,5,8,11,14,17,20,23,26,29,32,35,38,41,44,47,50,53,56,59 * * * * /usr/share/astguiclient/AST_CRON_audio_3_ftp.pl --GSM
+#
+# make sure that the following directories exist:
+# /var/spool/asterisk/monitor		# default Asterisk recording directory
+# /var/spool/asterisk/monitorDONE	# where the mixed -all files are put
+# 
+# This program assumes that recordings are saved by Asterisk as .wav
+# should be easy to change this code if you use .gsm instead
+# 
+# Copyright (C) 2008  Matt Florell <vicidial@gmail.com>    LICENSE: GPLv2
+#
+# 
+# 80302-1958 - First Build
+#
+
+### begin parsing run-time options ###
+if (length($ARGV[0])>1)
+{
+	$i=0;
+	while ($#ARGV >= $i)
+	{
+	$args = "$args $ARGV[$i]";
+	$i++;
+	}
+
+	if ($args =~ /--help/i)
+	{
+	print "allowed run time options:\n  [--debug] = debug\n  [--debugX] = super debug\n  [-t] = test\n\n";
+	exit;
+	}
+	else
+	{
+		if ($args =~ /--debug/i)
+		{
+		$DB=1;
+		print "\n----- DEBUG -----\n\n";
+		}
+		if ($args =~ /--debugX/i)
+		{
+		$DBX=1;
+		print "\n----- SUPER DEBUG -----\n\n";
+		}
+		if ($args =~ /-t/i)
+		{
+		$T=1;   $TEST=1;
+		print "\n-----TESTING -----\n\n";
+		}
+	}
+}
+else
+{
+#print "no command line options set\n";
+}
+
+
+# default path to astguiclient configuration file:
+$PATHconf =		'/etc/astguiclient.conf';
+
+open(conf, "$PATHconf") || die "can't open $PATHconf: $!\n";
+@conf = <conf>;
+close(conf);
+$i=0;
+foreach(@conf)
+	{
+	$line = $conf[$i];
+	$line =~ s/ |>|\n|\r|\t|\#.*|;.*//gi;
+	if ( ($line =~ /^PATHhome/) && ($CLIhome < 1) )
+		{$PATHhome = $line;   $PATHhome =~ s/.*=//gi;}
+	if ( ($line =~ /^PATHlogs/) && ($CLIlogs < 1) )
+		{$PATHlogs = $line;   $PATHlogs =~ s/.*=//gi;}
+	if ( ($line =~ /^PATHagi/) && ($CLIagi < 1) )
+		{$PATHagi = $line;   $PATHagi =~ s/.*=//gi;}
+	if ( ($line =~ /^PATHweb/) && ($CLIweb < 1) )
+		{$PATHweb = $line;   $PATHweb =~ s/.*=//gi;}
+	if ( ($line =~ /^PATHsounds/) && ($CLIsounds < 1) )
+		{$PATHsounds = $line;   $PATHsounds =~ s/.*=//gi;}
+	if ( ($line =~ /^PATHmonitor/) && ($CLImonitor < 1) )
+		{$PATHmonitor = $line;   $PATHmonitor =~ s/.*=//gi;}
+	if ( ($line =~ /^PATHDONEmonitor/) && ($CLIDONEmonitor < 1) )
+		{$PATHDONEmonitor = $line;   $PATHDONEmonitor =~ s/.*=//gi;}
+	if ( ($line =~ /^VARserver_ip/) && ($CLIserver_ip < 1) )
+		{$VARserver_ip = $line;   $VARserver_ip =~ s/.*=//gi;}
+	if ( ($line =~ /^VARDB_server/) && ($CLIDB_server < 1) )
+		{$VARDB_server = $line;   $VARDB_server =~ s/.*=//gi;}
+	if ( ($line =~ /^VARDB_database/) && ($CLIDB_database < 1) )
+		{$VARDB_database = $line;   $VARDB_database =~ s/.*=//gi;}
+	if ( ($line =~ /^VARDB_user/) && ($CLIDB_user < 1) )
+		{$VARDB_user = $line;   $VARDB_user =~ s/.*=//gi;}
+	if ( ($line =~ /^VARDB_pass/) && ($CLIDB_pass < 1) )
+		{$VARDB_pass = $line;   $VARDB_pass =~ s/.*=//gi;}
+	if ( ($line =~ /^VARDB_port/) && ($CLIDB_port < 1) )
+		{$VARDB_port = $line;   $VARDB_port =~ s/.*=//gi;}
+	if ( ($line =~ /^VARFTP_host/) && ($CLIFTP_host < 1) )
+		{$VARFTP_host = $line;   $VARFTP_host =~ s/.*=//gi;}
+	if ( ($line =~ /^VARFTP_user/) && ($CLIFTP_user < 1) )
+		{$VARFTP_user = $line;   $VARFTP_user =~ s/.*=//gi;}
+	if ( ($line =~ /^VARFTP_pass/) && ($CLIFTP_pass < 1) )
+		{$VARFTP_pass = $line;   $VARFTP_pass =~ s/.*=//gi;}
+	if ( ($line =~ /^VARFTP_port/) && ($CLIFTP_port < 1) )
+		{$VARFTP_port = $line;   $VARFTP_port =~ s/.*=//gi;}
+	if ( ($line =~ /^VARFTP_dir/) && ($CLIFTP_dir < 1) )
+		{$VARFTP_dir = $line;   $VARFTP_dir =~ s/.*=//gi;}
+	if ( ($line =~ /^VARHTTP_path/) && ($CLIHTTP_path < 1) )
+		{$VARHTTP_path = $line;   $VARHTTP_path =~ s/.*=//gi;}
+	$i++;
+	}
+
+# Customized Variables
+$server_ip = $VARserver_ip;		# Asterisk server IP
+if (!$VARDB_port) {$VARDB_port='3306';}
+
+use DBI;	  
+
+$dbhA = DBI->connect("DBI:mysql:$VARDB_database:$VARDB_server:$VARDB_port", "$VARDB_user", "$VARDB_pass")
+ or die "Couldn't connect to database: " . DBI->errstr;
+
+
+### find soxmix or sox to do the mixing
+$soxmixbin = '';
+if ( -e ('/usr/bin/soxmix')) {$soxmixbin = '/usr/bin/soxmix';}
+else 
+	{
+	if ( -e ('/usr/local/bin/soxmix')) {$soxmixbin = '/usr/local/bin/soxmix';}
+	else
+		{
+		if ($DB) {print "Can't find soxmix binary! Trying sox...\n";}
+		if ( -e ('/usr/bin/sox')) {$soxmixbin = '/usr/bin/sox -m';}
+		else 
+			{
+			if ( -e ('/usr/local/bin/sox')) {$soxmixbin = '/usr/local/bin/sox -m';}
+			else
+				{
+				print "Can't find sox binary! Exiting...\n";
+				exit;
+				}
+			}
+		}
+	}
+
+### directory where in/out recordings are saved to by Asterisk
+$dir1 = "$PATHmonitor";
+$dir2 = "$PATHDONEmonitor";
+
+ opendir(FILE, "$dir1/");
+ @FILES = readdir(FILE);
+
+$i=0;
+foreach(@FILES)
+   {
+	$size1 = 0;
+	$size2 = 0;
+
+	if ( (length($FILES[$i]) > 4) && (!-d $FILES[$i]) )
+		{
+
+		$size1 = (-s "$dir1/$FILES[$i]");
+		if ($DBX) {print "$FILES[$i] $size1\n";}
+		sleep(1);
+		$size2 = (-s "$dir1/$FILES[$i]");
+		if ($DBX) {print "$FILES[$i] $size2\n\n";}
+
+		if ( ($FILES[$i] !~ /out\.wav|out\.gsm|lost\+found/i) && ($size1 eq $size2) && (length($FILES[$i]) > 4))
+			{
+			$INfile = $FILES[$i];
+			$OUTfile = $FILES[$i];
+			$OUTfile =~ s/-in\.wav/-out.wav/gi;
+			$OUTfile =~ s/-in\.gsm/-out.gsm/gi;
+			$ALLfile = $FILES[$i];
+			$ALLfile =~ s/-in\.wav/-all.wav/gi;
+			$ALLfile =~ s/-in\.gsm/-all.gsm/gi;
+			$SQLFILE = $FILES[$i];
+			$SQLFILE =~ s/-in\.wav|-in\.gsm//gi;
+
+			$stmtA = "select recording_id from recording_log where filename='$SQLFILE' order by recording_id desc LIMIT 1;";
+			if($DBX){print STDERR "\n|$stmtA|\n";}
+			$sthA = $dbhA->prepare($stmtA) or die "preparing: ",$dbhA->errstr;
+			$sthA->execute or die "executing: $stmtA ", $dbhA->errstr;
+			$sthArows=$sthA->rows;
+			if ($sthArows > 0)
+				{
+				@aryA = $sthA->fetchrow_array;
+				$recording_id =	"$aryA[0]";
+				}
+			$sthA->finish();
+
+		if ($DB) {print "|$recording_id|$INfile|$OUTfile|     |$ALLfile|\n";}
+
+			`$soxmixbin "$dir1/$INfile" "$dir1/$OUTfile" "$dir2/$ALLfile"`;
+
+			$stmtA = "UPDATE recording_log set location='http://$server_ip/RECORDINGS/$ALLfile' where recording_id='$recording_id';";
+				if($DBX){print STDERR "\n|$stmtA|\n";}
+			$affected_rows = $dbhA->do($stmtA); #  or die  "Couldn't execute query:|$stmtA|\n";
+
+			if (!$T)
+				{
+				`mv -f "$dir1/$INfile" "$dir2/ORIG/$INfile"`;
+				`mv -f "$dir1/$OUTfile" "$dir2/ORIG/$OUTfile"`;
+				}
+			}
+		}
+	$i++;
+	}
+
+if ($DB) {print "DONE... EXITING\n\n";}
+
+$dbhA->disconnect();
+
+
+exit;
diff --git a/agc_2-X/branches/agc_2.0.4/bin/AST_CRON_audio_2_compress.pl b/agc_2-X/branches/agc_2.0.4/bin/AST_CRON_audio_2_compress.pl
new file mode 100644
index 00000000..55143ed0
--- /dev/null
+++ b/agc_2-X/branches/agc_2.0.4/bin/AST_CRON_audio_2_compress.pl
@@ -0,0 +1,292 @@
+#!/usr/bin/perl
+#
+# AST_CRON_audio_2_compress.pl
+#
+# This is a STEP-2 program in the audio archival process
+#
+# runs every 3 minutes and compresses the -all recording files to GSM format
+# 
+# put an entry into the cron of of your asterisk machine to run this script 
+# every 3 minutes or however often you desire
+#
+# ### recording mixing/compressing/ftping scripts
+##0,3,6,9,12,15,18,21,24,27,30,33,36,39,42,45,48,51,54,57 * * * * /usr/share/astguiclient/AST_CRON_audio_1_move_mix.pl
+# 0,3,6,9,12,15,18,21,24,27,30,33,36,39,42,45,48,51,54,57 * * * * /usr/share/astguiclient/AST_CRON_audio_1_move_VDonly.pl
+# 1,4,7,10,13,16,19,22,25,28,31,34,37,40,43,46,49,52,55,58 * * * * /usr/share/astguiclient/AST_CRON_audio_2_compress.pl --GSM
+# 2,5,8,11,14,17,20,23,26,29,32,35,38,41,44,47,50,53,56,59 * * * * /usr/share/astguiclient/AST_CRON_audio_3_ftp.pl --GSM
+#
+# FLAGS FOR COMPRESSION CODECS
+# --GSM = GSM 6.10 codec
+# --MP3 = MPEG Layer3 codec
+# --OGG = OGG Vorbis codec
+#
+# make sure that the following directories exist:
+# /var/spool/asterisk/monitorDONE	# where the mixed -all files are put
+# 
+# This program assumes that recordings are saved by Asterisk as .wav
+# 
+# Copyright (C) 2008  Matt Florell <vicidial@gmail.com>    LICENSE: GPLv2
+#
+# 
+# 80302-1958 - First Build
+#
+
+$GSM=0;   $MP3=0;   $OGG=0;
+
+### begin parsing run-time options ###
+if (length($ARGV[0])>1)
+{
+	$i=0;
+	while ($#ARGV >= $i)
+	{
+	$args = "$args $ARGV[$i]";
+	$i++;
+	}
+
+	if ($args =~ /--help/i)
+	{
+	print "allowed run time options:\n  [--debug] = debug\n  [--debugX] = super debug\n  [-t] = test\n  [--GSM] = compress into GSM codec\n  [--MP3] = compress into MPEG-Layer-3 codec\n  [--OGG] = compress into OGG Vorbis codec\n\n";
+	exit;
+	}
+	else
+	{
+		if ($args =~ /--debug/i)
+		{
+		$DB=1;
+		print "\n----- DEBUG -----\n\n";
+		}
+		if ($args =~ /--debugX/i)
+		{
+		$DBX=1;
+		print "\n----- SUPER DEBUG -----\n\n";
+		}
+		if ($args =~ /-t/i)
+		{
+		$T=1;   $TEST=1;
+		print "\n-----TESTING -----\n\n";
+		}
+		if ($args =~ /--GSM/i)
+		{
+		$GSM=1;
+		if ($DB) {print "GSM compression\n";}
+		}
+		else
+		{
+			if ($args =~ /--MP3/i)
+			{
+			$MP3=1;
+			if ($DB) {print "MP3 compression\n";}
+			}
+			else
+			{
+				if ($args =~ /--OGG/i)
+				{
+				$OGG=1;
+				if ($DB) {print "OGG compression\n";}
+				}
+			}
+		}
+	}
+}
+else
+{
+#print "no command line options set\n";
+$GSM=1;
+}
+
+
+# default path to astguiclient configuration file:
+$PATHconf =		'/etc/astguiclient.conf';
+
+open(conf, "$PATHconf") || die "can't open $PATHconf: $!\n";
+@conf = <conf>;
+close(conf);
+$i=0;
+foreach(@conf)
+	{
+	$line = $conf[$i];
+	$line =~ s/ |>|\n|\r|\t|\#.*|;.*//gi;
+	if ( ($line =~ /^PATHhome/) && ($CLIhome < 1) )
+		{$PATHhome = $line;   $PATHhome =~ s/.*=//gi;}
+	if ( ($line =~ /^PATHlogs/) && ($CLIlogs < 1) )
+		{$PATHlogs = $line;   $PATHlogs =~ s/.*=//gi;}
+	if ( ($line =~ /^PATHagi/) && ($CLIagi < 1) )
+		{$PATHagi = $line;   $PATHagi =~ s/.*=//gi;}
+	if ( ($line =~ /^PATHweb/) && ($CLIweb < 1) )
+		{$PATHweb = $line;   $PATHweb =~ s/.*=//gi;}
+	if ( ($line =~ /^PATHsounds/) && ($CLIsounds < 1) )
+		{$PATHsounds = $line;   $PATHsounds =~ s/.*=//gi;}
+	if ( ($line =~ /^PATHmonitor/) && ($CLImonitor < 1) )
+		{$PATHmonitor = $line;   $PATHmonitor =~ s/.*=//gi;}
+	if ( ($line =~ /^PATHDONEmonitor/) && ($CLIDONEmonitor < 1) )
+		{$PATHDONEmonitor = $line;   $PATHDONEmonitor =~ s/.*=//gi;}
+	if ( ($line =~ /^VARserver_ip/) && ($CLIserver_ip < 1) )
+		{$VARserver_ip = $line;   $VARserver_ip =~ s/.*=//gi;}
+	if ( ($line =~ /^VARDB_server/) && ($CLIDB_server < 1) )
+		{$VARDB_server = $line;   $VARDB_server =~ s/.*=//gi;}
+	if ( ($line =~ /^VARDB_database/) && ($CLIDB_database < 1) )
+		{$VARDB_database = $line;   $VARDB_database =~ s/.*=//gi;}
+	if ( ($line =~ /^VARDB_user/) && ($CLIDB_user < 1) )
+		{$VARDB_user = $line;   $VARDB_user =~ s/.*=//gi;}
+	if ( ($line =~ /^VARDB_pass/) && ($CLIDB_pass < 1) )
+		{$VARDB_pass = $line;   $VARDB_pass =~ s/.*=//gi;}
+	if ( ($line =~ /^VARDB_port/) && ($CLIDB_port < 1) )
+		{$VARDB_port = $line;   $VARDB_port =~ s/.*=//gi;}
+	if ( ($line =~ /^VARFTP_host/) && ($CLIFTP_host < 1) )
+		{$VARFTP_host = $line;   $VARFTP_host =~ s/.*=//gi;}
+	if ( ($line =~ /^VARFTP_user/) && ($CLIFTP_user < 1) )
+		{$VARFTP_user = $line;   $VARFTP_user =~ s/.*=//gi;}
+	if ( ($line =~ /^VARFTP_pass/) && ($CLIFTP_pass < 1) )
+		{$VARFTP_pass = $line;   $VARFTP_pass =~ s/.*=//gi;}
+	if ( ($line =~ /^VARFTP_port/) && ($CLIFTP_port < 1) )
+		{$VARFTP_port = $line;   $VARFTP_port =~ s/.*=//gi;}
+	if ( ($line =~ /^VARFTP_dir/) && ($CLIFTP_dir < 1) )
+		{$VARFTP_dir = $line;   $VARFTP_dir =~ s/.*=//gi;}
+	if ( ($line =~ /^VARHTTP_path/) && ($CLIHTTP_path < 1) )
+		{$VARHTTP_path = $line;   $VARHTTP_path =~ s/.*=//gi;}
+	$i++;
+	}
+
+# Customized Variables
+$server_ip = $VARserver_ip;		# Asterisk server IP
+if (!$VARDB_port) {$VARDB_port='3306';}
+
+use DBI;	  
+
+$dbhA = DBI->connect("DBI:mysql:$VARDB_database:$VARDB_server:$VARDB_port", "$VARDB_user", "$VARDB_pass")
+ or die "Couldn't connect to database: " . DBI->errstr;
+
+
+if ( ($GSM > 0) || ($OGG > 0) )
+	{
+	### find sox binary to do the compression
+	$soxbin = '';
+	if ( -e ('/usr/bin/sox')) {$soxbin = '/usr/bin/sox';}
+	else 
+		{
+		if ( -e ('/usr/local/bin/sox')) {$soxbin = '/usr/local/bin/sox';}
+		else
+			{
+			print "Can't find sox binary! Exiting...\n";
+			exit
+			}
+		}
+	}
+
+if ($MP3 > 0)
+	{
+	### find lame mp3 encoder binary to do the compression
+	$lamebin = '';
+	if ( -e ('/usr/bin/lame')) {$lamebin = '/usr/bin/lame';}
+	else 
+		{
+		if ( -e ('/usr/local/bin/lame')) {$lamebin = '/usr/local/bin/lame';}
+		else
+			{
+			print "Can't find lame binary! Exiting...\n";
+			exit
+			}
+		}
+	}
+
+
+
+### directory where -all recordings are
+$dir2 = "$PATHDONEmonitor";
+
+ opendir(FILE, "$dir2/");
+ @FILES = readdir(FILE);
+
+$i=0;
+foreach(@FILES)
+   {
+	$size1 = 0;
+	$size2 = 0;
+
+	if ( (length($FILES[$i]) > 4) && (!-d $FILES[$i]) )
+		{
+
+		$size1 = (-s "$dir2/$FILES[$i]");
+		if ($DBX) {print "$FILES[$i] $size1\n";}
+		sleep(1);
+		$size2 = (-s "$dir2/$FILES[$i]");
+		if ($DBX) {print "$FILES[$i] $size2\n\n";}
+
+		if ( ($FILES[$i] !~ /out\.|in\.|lost\+found/i) && ($size1 eq $size2) && (length($FILES[$i]) > 4))
+			{
+			$recording_id='';
+			$ALLfile = $FILES[$i];
+			$SQLFILE = $FILES[$i];
+			$SQLFILE =~ s/-all\.wav|-all\.gsm//gi;
+
+			$stmtA = "select recording_id from recording_log where filename='$SQLFILE' order by recording_id desc LIMIT 1;";
+			if($DBX){print STDERR "\n|$stmtA|\n";}
+			$sthA = $dbhA->prepare($stmtA) or die "preparing: ",$dbhA->errstr;
+			$sthA->execute or die "executing: $stmtA ", $dbhA->errstr;
+			$sthArows=$sthA->rows;
+			if ($sthArows > 0)
+				{
+				@aryA = $sthA->fetchrow_array;
+				$recording_id =	"$aryA[0]";
+				}
+			$sthA->finish();
+
+
+			if ($GSM > 0)
+				{
+				$GSMfile = $FILES[$i];
+				$GSMfile =~ s/-all\.wav/-all.gsm/gi;
+
+				if ($DB) {print "|$recording_id|$ALLfile|$GSMfile|     |$SQLfile|\n";}
+
+				`$soxbin "$dir2/$ALLfile" "$dir2/GSM/$GSMfile"`;
+
+				$stmtA = "UPDATE recording_log set location='http://$server_ip/RECORDINGS/GSM/$GSMfile' where recording_id='$recording_id';";
+					if($DBX){print STDERR "\n|$stmtA|\n";}
+				$affected_rows = $dbhA->do($stmtA); #  or die  "Couldn't execute query:|$stmtA|\n";
+				}
+
+			if ($OGG > 0)
+				{
+				$OGGfile = $FILES[$i];
+				$OGGfile =~ s/-all\.wav/-all.ogg/gi;
+
+				if ($DB) {print "|$recording_id|$ALLfile|$OGGfile|     |$SQLfile|\n";}
+
+				`$soxbin "$dir2/$ALLfile" "$dir2/OGG/$OGGfile"`;
+
+				$stmtA = "UPDATE recording_log set location='http://$server_ip/RECORDINGS/OGG/$OGGfile' where recording_id='$recording_id';";
+					if($DBX){print STDERR "\n|$stmtA|\n";}
+				$affected_rows = $dbhA->do($stmtA); #  or die  "Couldn't execute query:|$stmtA|\n";
+				}
+
+			if ($MP3 > 0)
+				{
+				$MP3file = $FILES[$i];
+				$MP3file =~ s/-all\.wav/-all.mp3/gi;
+
+				if ($DB) {print "|$recording_id|$ALLfile|$MP3file|     |$SQLfile|\n";}
+
+				`$lamebin -b 16 -m m --silent "$dir2/$ALLfile" "$dir2/MP3/$MP3file"`;
+
+				$stmtA = "UPDATE recording_log set location='http://$server_ip/RECORDINGS/MP3/$MP3file' where recording_id='$recording_id';";
+					if($DBX){print STDERR "\n|$stmtA|\n";}
+				$affected_rows = $dbhA->do($stmtA); #  or die  "Couldn't execute query:|$stmtA|\n";
+				}
+
+
+			if (!$T)
+				{
+				`mv -f "$dir2/$ALLfile" "$dir2/ORIG/$ALLfile"`;
+				}
+			}
+		}
+	$i++;
+	}
+
+if ($DB) {print "DONE... EXITING\n\n";}
+
+$dbhA->disconnect();
+
+
+exit;
diff --git a/agc_2-X/branches/agc_2.0.4/bin/AST_CRON_audio_3_ftp.pl b/agc_2-X/branches/agc_2.0.4/bin/AST_CRON_audio_3_ftp.pl
new file mode 100644
index 00000000..6cc14f0e
--- /dev/null
+++ b/agc_2-X/branches/agc_2.0.4/bin/AST_CRON_audio_3_ftp.pl
@@ -0,0 +1,279 @@
+#!/usr/bin/perl
+#
+# AST_CRON_audio_3_ftp.pl
+#
+# This is a STEP-3 program in the audio archival process
+#
+# runs every 3 minutes and copies the recording files to an FTP server
+# 
+# put an entry into the cron of of your asterisk machine to run this script 
+# every 3 minutes or however often you desire
+#
+# ### recording mixing/compressing/ftping scripts
+##0,3,6,9,12,15,18,21,24,27,30,33,36,39,42,45,48,51,54,57 * * * * /usr/share/astguiclient/AST_CRON_audio_1_move_mix.pl
+# 0,3,6,9,12,15,18,21,24,27,30,33,36,39,42,45,48,51,54,57 * * * * /usr/share/astguiclient/AST_CRON_audio_1_move_VDonly.pl
+# 1,4,7,10,13,16,19,22,25,28,31,34,37,40,43,46,49,52,55,58 * * * * /usr/share/astguiclient/AST_CRON_audio_2_compress.pl --GSM
+# 2,5,8,11,14,17,20,23,26,29,32,35,38,41,44,47,50,53,56,59 * * * * /usr/share/astguiclient/AST_CRON_audio_3_ftp.pl --GSM
+#
+# FLAGS FOR COMPRESSION FILES TO TRANSFER
+# --GSM = GSM 6.10 files
+# --MP3 = MPEG Layer3 files
+# --OGG = OGG Vorbis files
+# --WAV = WAV files
+#
+# FLAG FOR NO DATE DIRECTORY ON FTP
+# --NODATEDIR
+#
+# make sure that the following directories exist:
+# /var/spool/asterisk/monitorDONE	# where the mixed -all files are put
+# 
+# This program assumes that recordings are saved by Asterisk as .wav
+# 
+# Copyright (C) 2008  Matt Florell <vicidial@gmail.com>    LICENSE: GPLv2
+#
+# 
+# 80302-1958 - First Build
+# 80317-2349 - Added FTP debug if debugX
+#
+
+$GSM=0;   $MP3=0;   $OGG=0;   $WAV=0;   $NODATEDIR=0;
+
+# Default variables for FTP
+$VARFTP_host = '10.0.0.4';
+$VARFTP_user = 'cron';
+$VARFTP_pass = 'test';
+$VARFTP_port = '21';
+$VARFTP_dir  = 'RECORDINGS';
+$VARHTTP_path = 'http://10.0.0.4';
+
+
+### begin parsing run-time options ###
+if (length($ARGV[0])>1)
+{
+	$i=0;
+	while ($#ARGV >= $i)
+	{
+	$args = "$args $ARGV[$i]";
+	$i++;
+	}
+
+	if ($args =~ /--help/i)
+	{
+	print "allowed run time options:\n  [--debug] = debug\n  [--debugX] = super debug\n  [-t] = test\n  [--GSM] = copy GSM files\n  [--MP3] = copy MPEG-Layer-3 files\n  [--OGG] = copy OGG Vorbis files\n  [--WAV] = copy WAV files\n  [--NODATEDIR] = do not put into dated directories\n\n";
+	exit;
+	}
+	else
+	{
+		if ($args =~ /--debug/i)
+		{
+		$DB=1;
+		print "\n----- DEBUG -----\n\n";
+		}
+		if ($args =~ /--debugX/i)
+		{
+		$DBX=1;
+		print "\n----- SUPER DEBUG -----\n\n";
+		}
+		if ($args =~ /-t/i)
+		{
+		$T=1;   $TEST=1;
+		print "\n----- TESTING -----\n\n";
+		}
+		if ($args =~ /-nodatedir/i)
+		{
+		$NODATEDIR=1;
+		print "\n----- NO DATE DIRECTORIES -----\n\n";
+		}
+		if ($args =~ /--GSM/i)
+		{
+		$GSM=1;
+		if ($DB) {print "GSM audio files\n";}
+		}
+		else
+		{
+			if ($args =~ /--MP3/i)
+			{
+			$MP3=1;
+			if ($DB) {print "MP3 audio files\n";}
+			}
+			else
+			{
+				if ($args =~ /--OGG/i)
+				{
+				$OGG=1;
+				if ($DB) {print "OGG audio files\n";}
+				}
+				else
+				{
+					if ($args =~ /--WAV/i)
+					{
+					$WAV=1;
+					if ($DB) {print "WAV audio files\n";}
+					}
+				}
+			}
+		}
+	}
+}
+else
+{
+#print "no command line options set\n";
+$WAV=1;
+}
+
+
+# default path to astguiclient configuration file:
+$PATHconf =		'/etc/astguiclient.conf';
+
+open(conf, "$PATHconf") || die "can't open $PATHconf: $!\n";
+@conf = <conf>;
+close(conf);
+$i=0;
+foreach(@conf)
+	{
+	$line = $conf[$i];
+	$line =~ s/ |>|\n|\r|\t|\#.*|;.*//gi;
+	if ( ($line =~ /^PATHhome/) && ($CLIhome < 1) )
+		{$PATHhome = $line;   $PATHhome =~ s/.*=//gi;}
+	if ( ($line =~ /^PATHlogs/) && ($CLIlogs < 1) )
+		{$PATHlogs = $line;   $PATHlogs =~ s/.*=//gi;}
+	if ( ($line =~ /^PATHagi/) && ($CLIagi < 1) )
+		{$PATHagi = $line;   $PATHagi =~ s/.*=//gi;}
+	if ( ($line =~ /^PATHweb/) && ($CLIweb < 1) )
+		{$PATHweb = $line;   $PATHweb =~ s/.*=//gi;}
+	if ( ($line =~ /^PATHsounds/) && ($CLIsounds < 1) )
+		{$PATHsounds = $line;   $PATHsounds =~ s/.*=//gi;}
+	if ( ($line =~ /^PATHmonitor/) && ($CLImonitor < 1) )
+		{$PATHmonitor = $line;   $PATHmonitor =~ s/.*=//gi;}
+	if ( ($line =~ /^PATHDONEmonitor/) && ($CLIDONEmonitor < 1) )
+		{$PATHDONEmonitor = $line;   $PATHDONEmonitor =~ s/.*=//gi;}
+	if ( ($line =~ /^VARserver_ip/) && ($CLIserver_ip < 1) )
+		{$VARserver_ip = $line;   $VARserver_ip =~ s/.*=//gi;}
+	if ( ($line =~ /^VARDB_server/) && ($CLIDB_server < 1) )
+		{$VARDB_server = $line;   $VARDB_server =~ s/.*=//gi;}
+	if ( ($line =~ /^VARDB_database/) && ($CLIDB_database < 1) )
+		{$VARDB_database = $line;   $VARDB_database =~ s/.*=//gi;}
+	if ( ($line =~ /^VARDB_user/) && ($CLIDB_user < 1) )
+		{$VARDB_user = $line;   $VARDB_user =~ s/.*=//gi;}
+	if ( ($line =~ /^VARDB_pass/) && ($CLIDB_pass < 1) )
+		{$VARDB_pass = $line;   $VARDB_pass =~ s/.*=//gi;}
+	if ( ($line =~ /^VARDB_port/) && ($CLIDB_port < 1) )
+		{$VARDB_port = $line;   $VARDB_port =~ s/.*=//gi;}
+	if ( ($line =~ /^VARFTP_host/) && ($CLIFTP_host < 1) )
+		{$VARFTP_host = $line;   $VARFTP_host =~ s/.*=//gi;}
+	if ( ($line =~ /^VARFTP_user/) && ($CLIFTP_user < 1) )
+		{$VARFTP_user = $line;   $VARFTP_user =~ s/.*=//gi;}
+	if ( ($line =~ /^VARFTP_pass/) && ($CLIFTP_pass < 1) )
+		{$VARFTP_pass = $line;   $VARFTP_pass =~ s/.*=//gi;}
+	if ( ($line =~ /^VARFTP_port/) && ($CLIFTP_port < 1) )
+		{$VARFTP_port = $line;   $VARFTP_port =~ s/.*=//gi;}
+	if ( ($line =~ /^VARFTP_dir/) && ($CLIFTP_dir < 1) )
+		{$VARFTP_dir = $line;   $VARFTP_dir =~ s/.*=//gi;}
+	if ( ($line =~ /^VARHTTP_path/) && ($CLIHTTP_path < 1) )
+		{$VARHTTP_path = $line;   $VARHTTP_path =~ s/.*=//gi;}
+	$i++;
+	}
+
+# Customized Variables
+$server_ip = $VARserver_ip;		# Asterisk server IP
+if (!$VARDB_port) {$VARDB_port='3306';}
+
+use DBI;	  
+
+$dbhA = DBI->connect("DBI:mysql:$VARDB_database:$VARDB_server:$VARDB_port", "$VARDB_user", "$VARDB_pass")
+ or die "Couldn't connect to database: " . DBI->errstr;
+
+use Net::Ping;
+use Net::FTP;
+
+### directory where -all recordings are
+if ($WAV > 0) {$dir2 = "$PATHDONEmonitor";}
+if ($MP3 > 0) {$dir2 = "$PATHDONEmonitor/MP3";}
+if ($GSM > 0) {$dir2 = "$PATHDONEmonitor/GSM";}
+if ($OGG > 0) {$dir2 = "$PATHDONEmonitor/OGG";}
+
+ opendir(FILE, "$dir2/");
+ @FILES = readdir(FILE);
+
+$i=0;
+foreach(@FILES)
+   {
+	$size1 = 0;
+	$size2 = 0;
+
+	if ( (length($FILES[$i]) > 4) && (!-d $FILES[$i]) )
+		{
+
+		$size1 = (-s "$dir2/$FILES[$i]");
+		if ($DBX) {print "$FILES[$i] $size1\n";}
+		sleep(1);
+		$size2 = (-s "$dir2/$FILES[$i]");
+		if ($DBX) {print "$FILES[$i] $size2\n\n";}
+
+		if ( ($FILES[$i] !~ /out\.|in\.|lost\+found/i) && ($size1 eq $size2) && (length($FILES[$i]) > 4))
+			{
+			$recording_id='';
+			$ALLfile = $FILES[$i];
+			$SQLFILE = $FILES[$i];
+			$SQLFILE =~ s/-all\.wav|-all\.gsm|-all\.ogg|-all\.mp3//gi;
+
+			$stmtA = "select recording_id,start_time from recording_log where filename='$SQLFILE' order by recording_id desc LIMIT 1;";
+			if($DBX){print STDERR "\n|$stmtA|\n";}
+			$sthA = $dbhA->prepare($stmtA) or die "preparing: ",$dbhA->errstr;
+			$sthA->execute or die "executing: $stmtA ", $dbhA->errstr;
+			$sthArows=$sthA->rows;
+			if ($sthArows > 0)
+				{
+				@aryA = $sthA->fetchrow_array;
+				$recording_id =	"$aryA[0]";
+				$start_date =	"$aryA[1]";
+				$start_date =~ s/ .*//gi;
+				}
+			$sthA->finish();
+
+
+			if ($DB) {print "|$recording_id|$start_date|$ALLfile|     |$SQLfile|\n";}
+
+	### BEGIN Remote file transfer
+			$p = Net::Ping->new();
+			$ping_good = $p->ping("$VARFTP_host");
+
+			if ($ping_good)
+				{
+				$start_date_PATH='';
+				$FTPdb=0;
+				if ($DBX>0) {$FTPdb=1;}
+				$ftp = Net::FTP->new("$VARFTP_host", Port => $VARFTP_port, Debug => $FTPdb);
+				$ftp->login("$VARFTP_user","$VARFTP_pass");
+				$ftp->cwd("$VARFTP_dir");
+				if ($NODATEDIR < 1)
+					{
+					$ftp->mkdir("$start_date");
+					$ftp->cwd("$start_date");
+					$start_date_PATH = "$start_date/";
+					}
+				$ftp->binary();
+				$ftp->put("$dir2/$ALLfile", "$ALLfile");
+				$ftp->quit;
+
+				$stmtA = "UPDATE recording_log set location='$VARHTTP_path/$start_date_PATH$ALLfile' where recording_id='$recording_id';";
+					if($DB){print STDERR "\n|$stmtA|\n";}
+				$affected_rows = $dbhA->do($stmtA); #  or die  "Couldn't execute query:|$stmtA|\n";
+
+				if (!$T)
+					{
+					`mv -f "$dir2/$ALLfile" "$PATHDONEmonitor/FTP/$ALLfile"`;
+					}
+				}
+	### END Remote file transfer
+			}
+		}
+	$i++;
+	}
+
+if ($DB) {print "DONE... EXITING\n\n";}
+
+$dbhA->disconnect();
+
+
+exit;
diff --git a/agc_2-X/branches/agc_2.0.4/docs/BASE_INSTALL.txt b/agc_2-X/branches/agc_2.0.4/docs/BASE_INSTALL.txt
index 7b80e9b9..44dea57f 100644
--- a/agc_2-X/branches/agc_2.0.4/docs/BASE_INSTALL.txt
+++ b/agc_2-X/branches/agc_2.0.4/docs/BASE_INSTALL.txt
@@ -31,16 +31,16 @@ PHASE 1: INSTALLING ASTERISK
 1. follow these command line steps:
 mkdir /usr/src/asterisk
 cd /usr/src/asterisk
-wget http://ftp.digium.com/pub/asterisk/releases/asterisk-1.2.24.tar.gz
-wget http://ftp.digium.com/pub/zaptel/releases/zaptel-1.2.21.tar.gz
-wget http://ftp.digium.com/pub/libpri/releases/libpri-1.2.5.tar.gz
-gunzip asterisk-1.2.24.tar.gz
-tar xvf asterisk-1.2.24.tar
-gunzip zaptel-1.2.21.tar.gz
-tar xvf zaptel-1.2.21.tar
-gunzip libpri-1.2.5.tar.gz
-tar xvf libpri-1.2.5.tar
-cd ./zaptel-1.2.21
+wget http://ftp.digium.com/pub/asterisk/releases/asterisk-1.2.27.tar.gz
+wget http://ftp.digium.com/pub/zaptel/releases/zaptel-1.2.24.tar.gz
+wget http://ftp.digium.com/pub/libpri/releases/libpri-1.2.7.tar.gz
+gunzip asterisk-1.2.27.tar.gz
+tar xvf asterisk-1.2.27.tar
+gunzip zaptel-1.2.24.tar.gz
+tar xvf zaptel-1.2.24.tar
+gunzip libpri-1.2.7.tar.gz
+tar xvf libpri-1.2.7.tar
+cd ./zaptel-1.2.24
 wget http://www.freedomphones.net/files/newt-0.51.6.tar.gz
 gunzip newt-0.51.6.tar.gz
 tar xvf newt-0.51.6.tar
@@ -54,11 +54,11 @@ make clean
 make zttool
 make
 make install
-cd ../libpri-1.2.5
+cd ../libpri-1.2.7
 make clean
 make
 make install
-cd ../asterisk-1.2.24
+cd ../asterisk-1.2.27
 	(1.2 tree) If you want to include Answering Machine Detection ability
 	  you will need to download app_amd.c and amd.conf and alter the 
 	  apps/Makefile to compile it properly
@@ -73,11 +73,11 @@ cd ../asterisk-1.2.24
 	wget http://www.eflo.net/files/amd2.conf
 	mkdir /etc/asterisk
 	mv amd2.conf /etc/asterisk/amd.conf
-	*OPTIONAL*(1.2.23 thru 1.2.24) apply the meetme DTMF passthru patch
+	*OPTIONAL*(1.2.23 thru 1.2.27) apply the meetme DTMF passthru patch
 	wget http://www.eflo.net/files/meetme_DTMF_passthru-1.2.23.patch
 	patch -p1 < ./meetme_DTMF_passthru-1.2.23.patch
 		- File to patch: app_meetme.c
-	*OPTIONAL*(1.2.12.1 thru 1.2.24) apply the meetme volume control patch
+	*OPTIONAL*(1.2.12.1 thru 1.2.27) apply the meetme volume control patch
 		*Different patches available for 1.2.7.1 through 1.2.14
 	wget http://www.eflo.net/files/meetme_volume_control_1.2.16.patch
 	patch -p1 < ./meetme_volume_control_1.2.16.patch
@@ -89,7 +89,7 @@ cd ../asterisk-1.2.24
 	patch -p1 < ./cli_chan_concise_delimiter.patch
 		- File to patch: cli.c
 
-	*OPTIONAL*(1.2.14 thru 1.2.24) rewrite of waitforsilence
+	*OPTIONAL*(1.2.14 thru 1.2.27) rewrite of waitforsilence
 	wget http://www.eflo.net/files/app_waitforsilence.c
 	mv -f app_waitforsilence.c apps/app_waitforsilence.c
 
@@ -233,9 +233,20 @@ musiconhold audio files to be converted to native formats like GSM, ULAW and ALA
 	sox -r 44100 -w -s -c 1 fpm-world-mix.raw -r 8000 -c 1 fpm-world-mix.wav
 	sox fpm-world-mix.wav -t gsm -r 8000 -b -c 1 fpm-world-mix.gsm
 	sox fpm-world-mix.wav -t ul -r 8000 -b -c 1 fpm-world-mix.pcm
-	rm -f *.raw
 	mkdir ../orig-mp3
 	mv -f *.mp3 ../orig-mp3/
+	mkdir ../quiet-mp3
+	cd ../quiet-mp3
+	sox -r 44100 -w -s -c 1 ../mohmp3/fpm-sunshine.raw -r 8000 -c 1 -v 0.25 fpm-sunshine.wav
+	sox fpm-sunshine.wav -t gsm -r 8000 -b -c 1 fpm-sunshine.gsm
+	sox fpm-sunshine.wav -t ul -r 8000 -b -c 1 fpm-sunshine.pcm
+	sox -r 44100 -w -s -c 1 ../mohmp3/fpm-calm-river.raw -r 8000 -c 1 -v 0.25 fpm-calm-river.wav
+	sox fpm-calm-river.wav -t gsm -r 8000 -b -c 1 fpm-calm-river.gsm
+	sox fpm-calm-river.wav -t ul -r 8000 -b -c 1 fpm-calm-river.pcm
+	sox -r 44100 -w -s -c 1 ../mohmp3/fpm-world-mix.raw -r 8000 -c 1 -v 0.25 fpm-world-mix.wav
+	sox fpm-world-mix.wav -t gsm -r 8000 -b -c 1 fpm-world-mix.gsm
+	sox fpm-world-mix.wav -t ul -r 8000 -b -c 1 fpm-world-mix.pcm
+	rm -f ../mohmp3/*.raw
 
 
 
@@ -267,6 +278,10 @@ use asterisk;
 ##### make sure on these queries that you change the server_ip "10.10.10.15" 
 ##### to the server IP that you are using
 
+# NOTE: make sure you do NOT put any spaces or other punctuation in the
+# server_id, phone, extension, or user fields in the queries below if you edit them.
+
+
 insert into servers (server_id,server_description,server_ip,active,asterisk_version)values('TESTast','Test install of Asterisk server', '10.10.10.15','Y','1.2.26.2');
 
 insert into server_updater values('10.10.10.15','');
@@ -475,6 +490,7 @@ insert into vicidial_statuses values('XDROP','Agent Not Available IN','N','Y','U
 insert into vicidial_statuses values('NA','No Answer AutoDial','N','N','UNDEFINED');
 
 insert into vicidial_statuses values('CALLBK','Call Back','Y','Y','UNDEFINED');
+insert into vicidial_statuses values('CBHOLD','Call Back Hold','N','Y','UNDEFINED');
 insert into vicidial_statuses values('A','Answering Machine','Y','N','UNDEFINED');
 insert into vicidial_statuses values('AA','Answering Machine Auto','N','N','UNDEFINED');
 insert into vicidial_statuses values('AM','Answering Machine Sent to Mesg','N','N','UNDEFINED');
@@ -603,12 +619,12 @@ PHASE 6: ADDING CRONTAB ENTRIES FOR ASTGUICLIENT/VICIDIAL SCRIPTS
 	- cd /usr/share/astguiclient
 	- crontab -e
 	   - add the following entries(here's what we used):
-	      (Note if you have not edited the AST_CRON_mix_recordings.pl script 
-to FTP to a different server, then you should use the 
-AST_CRON_mix_recordings_BASIC.pl file in it's place)
 
-### recording mixing for Asterisk run every 5 minutes
-1,6,11,16,21,26,31,36,41,46,51,56 * * * 1,2,3,4,5,6 /usr/share/astguiclient/AST_CRON_mix_recordings_BASIC.pl
+### recording mixing/compressing/ftping scripts
+0,3,6,9,12,15,18,21,24,27,30,33,36,39,42,45,48,51,54,57 * * * * /usr/share/astguiclient/AST_CRON_audio_1_move_mix.pl
+#0,3,6,9,12,15,18,21,24,27,30,33,36,39,42,45,48,51,54,57 * * * * /usr/share/astguiclient/AST_CRON_audio_1_move_VDonly.pl
+1,4,7,10,13,16,19,22,25,28,31,34,37,40,43,46,49,52,55,58 * * * * /usr/share/astguiclient/AST_CRON_audio_2_compress.pl --GSM
+#2,5,8,11,14,17,20,23,26,29,32,35,38,41,44,47,50,53,56,59 * * * * /usr/share/astguiclient/AST_CRON_audio_3_ftp.pl --GSM
 
 ### keepalive script for astguiclient processes
 * * * * * /usr/share/astguiclient/ADMIN_keepalive_ALL.pl
diff --git a/agc_2-X/branches/agc_2.0.4/docs/REQUIRED_APPS_INSTALL.txt b/agc_2-X/branches/agc_2.0.4/docs/REQUIRED_APPS_INSTALL.txt
index 2c2c9090..a26757cf 100644
--- a/agc_2-X/branches/agc_2.0.4/docs/REQUIRED_APPS_INSTALL.txt
+++ b/agc_2-X/branches/agc_2.0.4/docs/REQUIRED_APPS_INSTALL.txt
@@ -12,23 +12,32 @@ cd make-3.81
 make
 make install
 
-cd /usr/local
-wget http://mirror.trouble-free.net/mysql_mirror/Downloads/MySQL-4.0/mysql-4.0.27.tar.gz
-gunzip mysql-4.0.27.tar.gz
-tar xvf mysql-4.0.27.tar
-cd mysql-4.0.27
+cd /usr/local/
+wget http://mirror.trouble-free.net/mysql_mirror/Downloads/MySQL-5.0/mysql-5.0.45.tar.gz
+gunzip mysql-5.0.45.tar.gz
+tar xvf mysql-5.0.45.tar
+cd mysql-5.0.45
 groupadd mysql
 useradd -g mysql mysql
-./configure --prefix=/usr/local/mysql --enable-large-files --enable-shared=yes --with-readline
+./configure --prefix=/usr/local/mysql --enable-shared=yes --with-readline --enable-thread-safe-client --enable-large-files --enable-assembler --with-client-ldflags=-all-static --with-mysqld-ldflags=-all-static --with-big-tables
 make
 make install
+PATH=$PATH:$HOME/bin:/usr/local/mysql/bin/
+export PATH
+cp /usr/local/mysql-5.0.45/libmysql/.libs/libmysqlclient.so /usr/lib/
+cp /usr/local/mysql-5.0.45/libmysql/.libs/libmysqlclient.so.15 /usr/lib/
+cd /usr/local/mysql-5.0.45
 scripts/mysql_install_db
 chown -R root  /usr/local/mysql
 chown -R mysql /usr/local/mysql/var
 chgrp -R mysql /usr/local/mysql
-cp support-files/my-medium.cnf /etc/my.cnf
-/usr/local/mysql/bin/mysqld_safe --user=mysql &
+cp support-files/my-huge.cnf /etc/my.cnf
+/usr/local/mysql/bin/mysqld_safe --user=mysql --skip-name-resolve --skip-host-cache &
 ln -s /tmp/mysql.sock /var/run/mysql/mysql.sock
+vi /etc/my.cnf
+	# add this line below 'skip-locking'
+	skip-name-resolve
+	# comment out the line 'log-bin=mysql-bin'
 
 
 perl -MCPAN -e shell
@@ -53,25 +62,35 @@ quit
 
 
 cd /usr/local
-wget http://asterisk.gnuinter.net/files/asterisk-perl-0.08.tar.gz
-gunzip asterisk-perl-0.08.tar.gz
-tar xvf asterisk-perl-0.08.tar
-cd asterisk-perl-0.08
+wget http://asterisk.gnuinter.net/files/asterisk-perl-0.10.tar.gz
+gunzip asterisk-perl-0.10.tar.gz
+tar xvf asterisk-perl-0.10.tar
+cd asterisk-perl-0.10
 perl Makefile.PL
 make all
 make install
 
 
 cd /usr/local
-wget http://easynews.dl.sourceforge.net/sourceforge/sox/sox-12.17.9.tar.gz
-gunzip sox-12.17.9.tar.gz
-tar xvf sox-12.17.9.tar
-cd sox-12.17.9
+wget http://easynews.dl.sourceforge.net/sourceforge/lame/lame-3.96.1.tar.gz
+gunzip lame-3.96.1.tar.gz
+tar xvf lame-3.96.1.tar
+cd lame-3.96.1
 ./configure
 make
 make install
 
 
+cd /usr/local
+wget http://easynews.dl.sourceforge.net/sourceforge/sox/sox-14.0.1.tar.gz
+gunzip sox-14.0.1.tar.gz
+tar xvf sox-14.0.1.tar
+cd sox-14.0.1
+./configure --disable-shared
+make
+make install
+
+
 cd /usr/local
 wget http://ftp.gnu.org/gnu/screen/screen-4.0.2.tar.gz
 gunzip screen-4.0.2.tar.gz
@@ -172,9 +191,9 @@ cd /usr/local
 wget http://mirror.candidhosting.com/pub/apache/httpd/httpd-2.0.61.tar.gz
 gunzip httpd-2.0.61.tar.gz
 tar xvf httpd-2.0.61.tar
-wget http://us2.php.net/distributions/php-4.4.7.tar.gz
-gunzip php-4.4.7.tar.gz
-tar xvf php-4.4.7.tar
+wget http://us2.php.net/distributions/php-4.4.8.tar.gz
+gunzip php-4.4.8.tar.gz
+tar xvf php-4.4.8.tar
 cd httpd-2.0.61
 ./configure --prefix=/usr/local/apache2 --enable-ssl --enable-setenvif --enable-so --with-apxs2 --enable-dav --enable-maintainer-mode
 make
@@ -188,7 +207,7 @@ openssl req -new -x509 -days 1200 -keyout /usr/local/apache2/conf/ssl.key/server
 openssl rsa -in /usr/local/apache2/conf/ssl.key/server.key.cpy -out /usr/local/apache2/conf/ssl.key/server.key
 
 
-cd ../php-4.4.7
+cd ../php-4.4.8
 ./configure --with-mysql=/usr/local/mysql --enable-inline-optimization --enable-memory-limit --enable-track-vars --enable-libgcc --with-xml --enable-versioning --enable-sysvsem --with-openssl --disable-debug --with-apxs2=/usr/local/apache2/bin/apxs --with-zlib
 make
 make install
@@ -288,16 +307,16 @@ make install
 
 mkdir /usr/src/asterisk
 cd /usr/src/asterisk
-wget http://ftp.digium.com/pub/asterisk/releases/asterisk-1.2.26.2.tar.gz
-wget http://ftp.digium.com/pub/zaptel/releases/zaptel-1.2.23.tar.gz
+wget http://ftp.digium.com/pub/asterisk/releases/asterisk-1.2.27.tar.gz
+wget http://ftp.digium.com/pub/zaptel/releases/zaptel-1.2.24.tar.gz
 wget http://ftp.digium.com/pub/libpri/releases/libpri-1.2.7.tar.gz
-gunzip asterisk-1.2.26.2.tar.gz
-tar xvf asterisk-1.2.26.2.tar
-gunzip zaptel-1.2.23.tar.gz
-tar xvf zaptel-1.2.23.tar
+gunzip asterisk-1.2.27.tar.gz
+tar xvf asterisk-1.2.27.tar
+gunzip zaptel-1.2.24.tar.gz
+tar xvf zaptel-1.2.24.tar
 gunzip libpri-1.2.7.tar.gz
 tar xvf libpri-1.2.7.tar
-cd ./zaptel-1.2.23
+cd ./zaptel-1.2.24
 wget http://www.freedomphones.net/files/newt-0.51.6.tar.gz
 gunzip newt-0.51.6.tar.gz
 tar xvf newt-0.51.6.tar
@@ -315,7 +334,7 @@ cd ../libpri-1.2.7
 make clean
 make
 make install
-cd ../asterisk-1.2.26.2
+cd ../asterisk-1.2.27
 cd apps
 wget http://www.eflo.net/files/app_amd2.c
 mv app_amd2.c app_amd.c
@@ -379,13 +398,28 @@ mpg123 -s --rate 44100 --mono /var/lib/asterisk/mohmp3/fpm-world-mix.mp3 > /var/
 sox -r 44100 -w -s -c 1 fpm-world-mix.raw -r 8000 -c 1 fpm-world-mix.wav
 sox fpm-world-mix.wav -t gsm -r 8000 -b -c 1 fpm-world-mix.gsm
 sox fpm-world-mix.wav -t ul -r 8000 -b -c 1 fpm-world-mix.pcm
-rm -f *.raw
 mkdir ../orig-mp3
 mv -f *.mp3 ../orig-mp3/
+mkdir ../quiet-mp3
+cd ../quiet-mp3
+sox -r 44100 -w -s -c 1 ../mohmp3/fpm-sunshine.raw -r 8000 -c 1 -v 0.25 fpm-sunshine.wav
+sox fpm-sunshine.wav -t gsm -r 8000 -b -c 1 fpm-sunshine.gsm
+sox fpm-sunshine.wav -t ul -r 8000 -b -c 1 fpm-sunshine.pcm
+sox -r 44100 -w -s -c 1 ../mohmp3/fpm-calm-river.raw -r 8000 -c 1 -v 0.25 fpm-calm-river.wav
+sox fpm-calm-river.wav -t gsm -r 8000 -b -c 1 fpm-calm-river.gsm
+sox fpm-calm-river.wav -t ul -r 8000 -b -c 1 fpm-calm-river.pcm
+sox -r 44100 -w -s -c 1 ../mohmp3/fpm-world-mix.raw -r 8000 -c 1 -v 0.25 fpm-world-mix.wav
+sox fpm-world-mix.wav -t gsm -r 8000 -b -c 1 fpm-world-mix.gsm
+sox fpm-world-mix.wav -t ul -r 8000 -b -c 1 fpm-world-mix.pcm
+rm -f ../mohmp3/*.raw
 
 
 
 ############# INSTRUCTIONS FOR Asterik 1.4 release ####################
+Downgrading back to 1.2.X from 1.4.X:
+rm -f /usr/lib/asterisk/modules/*
+rm -f /usr/include/asterisk/*
+
 
 NOTE: If you want to use Asterisk 1.4, you will need to make sure that you set
 the servers table "asterisk_version" field to the proper version number and you
@@ -409,14 +443,44 @@ rm -f /usr/lib/asterisk/modules/format_au.so
 rm -f /usr/lib/asterisk/modules/format_pcm_alaw.so
 rm -f /usr/lib/asterisk/modules/pbx_functions.so
 
+### If downgrading from 1.4.X Asterisk to 1.2.X asterisk:
+rm -f /usr/lib/asterisk/modules/app_channelredirect.so
+rm -f /usr/lib/asterisk/modules/app_followme.so
+rm -f /usr/lib/asterisk/modules/app_morsecode.so
+rm -f /usr/lib/asterisk/modules/app_speech_utils.so
+rm -f /usr/lib/asterisk/modules/format_h264.so
+rm -f /usr/lib/asterisk/modules/func_base64.so
+rm -f /usr/lib/asterisk/modules/func_cdr.so
+rm -f /usr/lib/asterisk/modules/func_channel.so
+rm -f /usr/lib/asterisk/modules/func_curl.so
+rm -f /usr/lib/asterisk/modules/func_cut.so
+rm -f /usr/lib/asterisk/modules/func_db.so
+rm -f /usr/lib/asterisk/modules/func_env.so
+rm -f /usr/lib/asterisk/modules/func_global.so
+rm -f /usr/lib/asterisk/modules/func_groupcount.so
+rm -f /usr/lib/asterisk/modules/func_language.so
+rm -f /usr/lib/asterisk/modules/func_logic.so
+rm -f /usr/lib/asterisk/modules/func_math.so
+rm -f /usr/lib/asterisk/modules/func_md5.so
+rm -f /usr/lib/asterisk/modules/func_moh.so
+rm -f /usr/lib/asterisk/modules/func_rand.so
+rm -f /usr/lib/asterisk/modules/func_realtime.so
+rm -f /usr/lib/asterisk/modules/func_sha1.so
+rm -f /usr/lib/asterisk/modules/func_strings.so
+rm -f /usr/lib/asterisk/modules/func_timeout.so
+rm -f /usr/lib/asterisk/modules/res_clioriginate.so
+rm -f /usr/lib/asterisk/modules/res_convert.so
+rm -f /usr/lib/asterisk/modules/res_smdi.so
+rm -f /usr/lib/asterisk/modules/res_snmp.so
+rm -f /usr/lib/asterisk/modules/res_speech.so
 
 mkdir /usr/src/asterisk-1.4
 cd /usr/src/asterisk-1.4
-wget http://ftp.digium.com/pub/asterisk/releases/asterisk-1.4.17.tar.gz
+wget http://ftp.digium.com/pub/asterisk/releases/asterisk-1.4.18.tar.gz
 wget http://ftp.digium.com/pub/zaptel/releases/zaptel-1.4.8.tar.gz
 wget http://ftp.digium.com/pub/libpri/releases/libpri-1.4.3.tar.gz
-gunzip asterisk-1.4.17.tar.gz
-tar xvf asterisk-1.4.17.tar
+gunzip asterisk-1.4.18.tar.gz
+tar xvf asterisk-1.4.18.tar
 gunzip zaptel-1.4.8.tar.gz
 tar xvf zaptel-1.4.8.tar
 gunzip libpri-1.4.3.tar.gz
@@ -429,7 +493,7 @@ cd ../libpri-1.4.3
 make clean
 make
 make install
-cd ../asterisk-1.4.17
+cd ../asterisk-1.4.18
 wget http://www.eflo.net/files/enter.h
 wget http://www.eflo.net/files/leave.h
 mv -f enter.h apps/enter.h
diff --git a/agc_2-X/branches/agc_2.0.4/docs/SCRATCH_INSTALL.txt b/agc_2-X/branches/agc_2.0.4/docs/SCRATCH_INSTALL.txt
index adf1099c..8a490e59 100644
--- a/agc_2-X/branches/agc_2.0.4/docs/SCRATCH_INSTALL.txt
+++ b/agc_2-X/branches/agc_2.0.4/docs/SCRATCH_INSTALL.txt
@@ -66,7 +66,7 @@ PHASE 1: INSTALLING AN OPERATING SYSTEM
 
 
 This installation will be using Slackware 11 for the linux distribution, 
-Slackware 10.X will also work with these instructions. There are several easier 
+Slackware 12.X will also work with these instructions. There are several easier 
 linux distributions and there are others that are more popular, but Slackware is 
 a nice non-commercial distro that has been around for a long time and proven 
 itself to be a very uncluttered and stable platform for development.
@@ -363,7 +363,7 @@ NOTE: a minimum of MySQL server 4.0.X is required
    - to install this directly on the command line type:
 	- cd /usr/local
 	- wget http://mirror.trouble-free.net/mysql_mirror/Downloads/MySQL-4.0/mysql-4.0.27.tar.gz
-		# http://mirror.trouble-free.net/mysql_mirror/Downloads/MySQL-5.0/mysql-5.0.41.tar.gz
+		# http://mirror.trouble-free.net/mysql_mirror/Downloads/MySQL-5.0/mysql-5.0.45.tar.gz
 	- gunzip mysql-4.0.27.tar.gz
 	- tar xvf mysql-4.0.27.tar
 	- cd mysql-4.0.27
@@ -381,15 +381,15 @@ NOTE: a minimum of MySQL server 4.0.X is required
 	- chown -R mysql /usr/local/mysql/var
 	- chgrp -R mysql /usr/local/mysql
 	- cp support-files/my-medium.cnf /etc/my.cnf
-	- /usr/local/mysql/bin/mysqld_safe --user=mysql &
+	- /usr/local/mysql/bin/mysqld_safe --user=mysql --skip-name-resolve --skip-host-cache &
 	- ln -s /tmp/mysql.sock /var/run/mysql/mysql.sock
 	   **** For some systems you may need to add the mysql/bin directory to your PATH:
 		- PATH=$PATH:$HOME/bin:/usr/local/mysql/bin/
 		- export PATH
 	   **** you may also want to add those two lines to your /root/.bash_profile file
 	   **** For Mysql 5 tree only, you also may need to copy the libmysqlclient.so file to libs
-		- cp /usr/local/mysql-5.0.27/libmysql/.libs/libmysqlclient.so /usr/lib/
-		- cp /usr/local/mysql-5.0.27/libmysql/.libs/libmysqlclient.so.15 /usr/lib/
+		- cp /usr/local/mysql-5.0.45/libmysql/.libs/libmysqlclient.so /usr/lib/
+		- cp /usr/local/mysql-5.0.45/libmysql/.libs/libmysqlclient.so.15 /usr/lib/
    - you are done
 
    ** INSTALLATION NOTE **
@@ -479,11 +479,12 @@ in and out as separate files
 1. Go to http://sourceforge.net/projects/sox/ and download the sox package
    - to install this directly on the command line type:
 	- cd /usr/local
-	- wget http://easynews.dl.sourceforge.net/sourceforge/sox/sox-12.17.9.tar.gz
-	- gunzip sox-12.17.9.tar.gz
-	- tar xvf sox-12.17.9.tar
-	- cd sox-12.17.9
-	- ./configure
+	- cd /usr/local
+	- wget http://easynews.dl.sourceforge.net/sourceforge/sox/sox-14.0.1.tar.gz
+	- gunzip sox-14.0.1.tar.gz
+	- tar xvf sox-14.0.1.tar
+	- cd sox-14.0.1
+	- ./configure --disable-shared
 	- make			(if alsa.o errors add --disable-alsa-dsp to configure and redo)
 	- make install
    - you are done
@@ -610,15 +611,15 @@ that can be displayed real-time on a web page.
    - to install this directly on the command line type:
 	NOTE: you may have to edit the Makefile to remove X11 if you don't have it
 	- cd /usr/local	
-	- wget http://ploticus.sourceforge.net/download/pl232src.tar.gz
-	- gunzip pl232src.tar.gz
-	- tar xvf pl232src.tar
-	- cd pl232src/src/
+	- wget http://superb-west.dl.sourceforge.net/sourceforge/ploticus/pl240src.tar.gz
+	- gunzip pl240src.tar.gz
+	- tar xvf pl240src.tar
+	- cd pl240src/src/
 	- make clean
 	- make
 	- make install
    - you are done
-   NOTE: uncomment these lines to compile on systems without X11:
+   NOTE: uncomment these lines to compile on systems without X11(v232):
 	NOXFLAG = -DNOX11
 	XLIBS =
 	XOBJ =
@@ -681,18 +682,18 @@ installation on another machine)
     Go to http://www.php.net/ and download the php unix source code
    - to install this directly on the command line type:
 	- cd /usr/local
-	- wget http://apache.secsup.org/dist/httpd/httpd-2.0.61.tar.gz
+	- wget http://mirror.candidhosting.com/pub/apache/httpd/httpd-2.0.61.tar.gz
 	- gunzip httpd-2.0.61.tar.gz
 	- tar xvf httpd-2.0.61.tar
-	- wget http://us2.php.net/distributions/php-4.4.7.tar.gz
+	- wget http://us2.php.net/distributions/php-4.4.8.tar.gz
 		NOTE: PHP 5.1.1 has also been tested with this release
-	- gunzip php-4.4.7.tar.gz
-	- tar xvf php-4.4.7.tar
+	- gunzip php-4.4.8.tar.gz
+	- tar xvf php-4.4.8.tar
 	- cd httpd-2.0.61
 	- ./configure --enable-so --with-apxs2
 	- make
 	- make install
-	- cd ../php-4.4.7
+	- cd ../php-4.4.8
 	- ./configure --with-apxs2=/usr/local/apache2/bin/apxs --with-mysql
 	- make
 	- make install
@@ -853,13 +854,13 @@ with the following patch:
 	- mkdir /usr/src/asterisk
 	- cd /usr/src/asterisk
    A. if you want 1.2 release (reliable with new features):
-	- wget http://ftp.digium.com/pub/asterisk/releases/asterisk-1.2.24.tar.gz
-	- wget http://ftp.digium.com/pub/zaptel/releases/zaptel-1.2.21.tar.gz
+	- wget http://ftp.digium.com/pub/asterisk/releases/asterisk-1.2.27.tar.gz
+	- wget http://ftp.digium.com/pub/zaptel/releases/zaptel-1.2.24.tar.gz
 	- wget http://ftp.digium.com/pub/libpri/releases/libpri-1.2.5.tar.gz
-	- gunzip asterisk-1.2.24.tar.gz
-	- tar xvf asterisk-1.2.24.tar
-	- gunzip zaptel-1.2.21.tar.gz
-	- tar xvf zaptel-1.2.21.tar
+	- gunzip asterisk-1.2.27.tar.gz
+	- tar xvf asterisk-1.2.27.tar
+	- gunzip zaptel-1.2.24.tar.gz
+	- tar xvf zaptel-1.2.24.tar
 	- gunzip libpri-1.2.5.tar.gz
 	- tar xvf libpri-1.2.5.tar
    B. if you want latest SVN_1.2 version (release tree with new patches)
@@ -884,7 +885,7 @@ with the following patch:
 		edit this line at the top and just add a hash # in front of it as shown:
 		#PBX_LIBS+=$(shell $(CROSS_COMPILE_BIN)gtk-config --cflags >/dev/null 2>/dev/null && echo "pbx_gtkconsole.so")
 
-	- cd ./zaptel-1.2.21
+	- cd ./zaptel-1.2.24
 	- make clean
 	- make
 	- make install
@@ -892,7 +893,7 @@ with the following patch:
 	- make clean
 	- make
 	- make install
-	- cd ../asterisk-1.2.24
+	- cd ../asterisk-1.2.27
 		- (1.2 tree) If you want to include Answering Machine Detection ability
 		  you will need to download app_amd.c and amd.conf and alter the 
 		  apps/Makefile to compile it properly
@@ -907,11 +908,11 @@ with the following patch:
 		- wget http://www.eflo.net/files/amd2.conf
 		- mkdir /etc/asterisk
 		- mv amd2.conf /etc/asterisk/amd.conf
-		*OPTIONAL*(1.2.23 thru 1.2.24) apply the meetme DTMF passthru patch
+		*OPTIONAL*(1.2.23 thru 1.2.27) apply the meetme DTMF passthru patch
 		- wget http://www.eflo.net/files/meetme_DTMF_passthru-1.2.23.patch
 		- patch -p1 < ./meetme_DTMF_passthru-1.2.23.patch
 		- File to patch: app_meetme.c
-		*OPTIONAL*(1.2.12.1 thru 1.2.24) apply the meetme volume control patch
+		*OPTIONAL*(1.2.12.1 thru 1.2.27) apply the meetme volume control patch
 			*Different patches available for 1.2.7.1 through 1.2.14
 		- wget http://www.eflo.net/files/meetme_volume_control_1.2.16.patch
 		- patch -p1 < ./meetme_volume_control_1.2.16.patch
@@ -923,9 +924,9 @@ with the following patch:
 		- patch -p1 < ./cli_chan_concise_delimiter.patch
 			- File to patch: cli.c
 
-		*OPTIONAL*(1.2.14 thru 1.2.24) rewrite of waitforsilence
+		*OPTIONAL*(1.2.14 thru 1.2.27) rewrite of waitforsilence
 		- wget http://www.eflo.net/files/app_waitforsilence.c
-		- mv app_waitforsilence.c apps/app_waitforsilence.c
+		- mv -f app_waitforsilence.c apps/app_waitforsilence.c
 
 		*OPTIONAL* shorter enter and leave sounds for meetme
 		- wget http://www.eflo.net/files/enter.h
@@ -966,7 +967,7 @@ them:
 	- If you have chosen a Sangoma T1/E1 or analog card, you will need to 
 	  follow their instructions for installation of their driver software
 	  LATEST Sangoma Wanpipe drivers: 
-	  ftp://ftp.sangoma.com/linux/current_wanpipe/wanpipe-3.2.1.tgz
+	  ftp://ftp.sangoma.com/linux/current_wanpipe/wanpipe-3.2.4.tgz
    - now your asterisk installation is built and loaded and it's time to 
 configure it.
 
@@ -1021,9 +1022,20 @@ musiconhold audio files to be converted to native formats like GSM, ULAW and ALA
 	sox -r 44100 -w -s -c 1 fpm-world-mix.raw -r 8000 -c 1 fpm-world-mix.wav
 	sox fpm-world-mix.wav -t gsm -r 8000 -b -c 1 fpm-world-mix.gsm
 	sox fpm-world-mix.wav -t ul -r 8000 -b -c 1 fpm-world-mix.pcm
-	rm -f *.raw
 	mkdir ../orig-mp3
 	mv -f *.mp3 ../orig-mp3/
+	mkdir ../quiet-mp3
+	cd ../quiet-mp3
+	sox -r 44100 -w -s -c 1 ../mohmp3/fpm-sunshine.raw -r 8000 -c 1 -v 0.25 fpm-sunshine.wav
+	sox fpm-sunshine.wav -t gsm -r 8000 -b -c 1 fpm-sunshine.gsm
+	sox fpm-sunshine.wav -t ul -r 8000 -b -c 1 fpm-sunshine.pcm
+	sox -r 44100 -w -s -c 1 ../mohmp3/fpm-calm-river.raw -r 8000 -c 1 -v 0.25 fpm-calm-river.wav
+	sox fpm-calm-river.wav -t gsm -r 8000 -b -c 1 fpm-calm-river.gsm
+	sox fpm-calm-river.wav -t ul -r 8000 -b -c 1 fpm-calm-river.pcm
+	sox -r 44100 -w -s -c 1 ../mohmp3/fpm-world-mix.raw -r 8000 -c 1 -v 0.25 fpm-world-mix.wav
+	sox fpm-world-mix.wav -t gsm -r 8000 -b -c 1 fpm-world-mix.gsm
+	sox fpm-world-mix.wav -t ul -r 8000 -b -c 1 fpm-world-mix.pcm
+	rm -f ../mohmp3/*.raw
 
 
 
@@ -1685,6 +1697,9 @@ GRANT SELECT,INSERT,UPDATE,DELETE,LOCK TABLES on asterisk.* TO cron@localhost ID
 # NOTE: if using MySQL 4.1.12 or higher you may need to run this query too:
 UPDATE mysql.user set password=OLD_PASSWORD('1234') where user='cron';
 
+# NOTE: make sure you do NOT put any spaces or other punctuation in the
+# server_id, phone, extension, or user fields in the queries below if you edit them.
+
 use asterisk;
 
 \. /usr/share/astguiclient/MySQL_AST_CREATE_tables.sql
@@ -2486,9 +2501,14 @@ exten => 8500998,2,Playback(silence)
 exten => 8500998,3,AGI(agi-dtmf.agi)
 exten => 8500998,4,Hangup
 
-; prompt recording AGI script, ID is 4321
+; prompts for recording AGI script, ID is 4321
+; first variable is format (gsm/wav)
+; second variable is timeout in milliseconds (default is 360000 [6 minutes])
+exten => 8167,1,Answer
+exten => 8167,2,AGI(agi-record_prompts.agi,wav-----360000)
+exten => 8167,3,Hangup
 exten => 8168,1,Answer
-exten => 8168,2,AGI(agi-record_prompts.agi)
+exten => 8168,2,AGI(agi-record_prompts.agi,gsm-----360000)
 exten => 8168,3,Hangup
 
 ; playback of recorded prompts
@@ -2791,8 +2811,10 @@ SUBPHASE 6.4: setting up asterisk and helper applications for startup
 # mke2fs -m 0 /dev/ram0
 # mount /dev/ram0 /var/spool/asterisk/monitor
 
-### Path to local asterisk-perl_0.08 module if needed
-PERL5LIB="/usr/share/astguiclient/libs"; export PERL5LIB
+# Disable console blanking and powersaving
+/usr/bin/setterm -blank
+/usr/bin/setterm -powersave off
+/usr/bin/setterm -powerdown
 
 ### start time server
 /usr/local/bin/ntpdate -u 18.145.0.30
@@ -2839,12 +2861,12 @@ SUBPHASE 6.5: setting up astguiclient scripts for continuous running
 	- cd /usr/share/astguiclient
 	- crontab -e
 	   - add the following entries(here's what we used):
-	      (Note if you have not edited the AST_CRON_mix_recordings.pl script 
-to FTP to a different server, then you should use the 
-AST_CRON_mix_recordings_BASIC.pl file in it's place)
 
-### recording mixing for Asterisk run every 5 minutes
-1,6,11,16,21,26,31,36,41,46,51,56 * * * 1,2,3,4,5,6 /usr/share/astguiclient/AST_CRON_mix_recordings_BASIC.pl
+### recording mixing/compressing/ftping scripts
+0,3,6,9,12,15,18,21,24,27,30,33,36,39,42,45,48,51,54,57 * * * * /usr/share/astguiclient/AST_CRON_audio_1_move_mix.pl
+#0,3,6,9,12,15,18,21,24,27,30,33,36,39,42,45,48,51,54,57 * * * * /usr/share/astguiclient/AST_CRON_audio_1_move_VDonly.pl
+1,4,7,10,13,16,19,22,25,28,31,34,37,40,43,46,49,52,55,58 * * * * /usr/share/astguiclient/AST_CRON_audio_2_compress.pl --GSM
+#2,5,8,11,14,17,20,23,26,29,32,35,38,41,44,47,50,53,56,59 * * * * /usr/share/astguiclient/AST_CRON_audio_3_ftp.pl --GSM
 
 ### keepalive script for astguiclient processes
 * * * * * /usr/share/astguiclient/ADMIN_keepalive_ALL.pl
@@ -2963,6 +2985,7 @@ insert into vicidial_statuses values('XDROP','Agent Not Available IN','N','Y','U
 insert into vicidial_statuses values('NA','No Answer AutoDial','N','N','UNDEFINED');
 
 insert into vicidial_statuses values('CALLBK','Call Back','Y','Y','UNDEFINED');
+insert into vicidial_statuses values('CBHOLD','Call Back Hold','N','Y','UNDEFINED');
 insert into vicidial_statuses values('A','Answering Machine','Y','N','UNDEFINED');
 insert into vicidial_statuses values('AA','Answering Machine Auto','N','N','UNDEFINED');
 insert into vicidial_statuses values('AM','Answering Machine Sent to Mesg','N','N','UNDEFINED');
@@ -3091,10 +3114,7 @@ The browser requirements for this are:
 - Microsoft Internet Explorer 6.0
 
 This version is fully functional and has been tested in our production 
-call center with no problems. On RedHat 9.0 Linux workstations we have noticed 
-a decrease in system load running the web-client as compared to the Perl/Tk 
-client. Also, the memory usage stayed at about 22MB for a full shift of 
-activity, so no memory leaks with Firefox. 
+call center with no problems.
 
 To log into this app you will need a login setup in the vicidial_users table 
 with a user_level of 1 or greater as well as an entry for the phone you are 
diff --git a/agc_2-X/branches/agc_2.0.4/extras/ip_relay/ip_relay.zip b/agc_2-X/branches/agc_2.0.4/extras/ip_relay/ip_relay.zip
new file mode 100644
index 00000000..575d143b
Binary files /dev/null and b/agc_2-X/branches/agc_2.0.4/extras/ip_relay/ip_relay.zip differ
diff --git a/agc_2-X/branches/agc_2.0.4/extras/ip_relay/ip_relay_1.0.021902.tar b/agc_2-X/branches/agc_2.0.4/extras/ip_relay/ip_relay_1.0.021902.tar
new file mode 100644
index 00000000..194a4a71
Binary files /dev/null and b/agc_2-X/branches/agc_2.0.4/extras/ip_relay/ip_relay_1.0.021902.tar differ
diff --git a/agc_2-X/branches/agc_2.0.4/extras/ip_relay/ip_relay_1.1.112705.zip b/agc_2-X/branches/agc_2.0.4/extras/ip_relay/ip_relay_1.1.112705.zip
new file mode 100644
index 00000000..9a7ed31a
Binary files /dev/null and b/agc_2-X/branches/agc_2.0.4/extras/ip_relay/ip_relay_1.1.112705.zip differ
diff --git a/agc_2-X/branches/agc_2.0.4/extras/ip_relay/ip_relay_linux_i386 b/agc_2-X/branches/agc_2.0.4/extras/ip_relay/ip_relay_linux_i386
new file mode 100644
index 00000000..5a325343
Binary files /dev/null and b/agc_2-X/branches/agc_2.0.4/extras/ip_relay/ip_relay_linux_i386 differ
diff --git a/agc_2-X/branches/agc_2.0.4/extras/ip_relay/lib_ip_relay_linux_i386.so.1.0.1 b/agc_2-X/branches/agc_2.0.4/extras/ip_relay/lib_ip_relay_linux_i386.so.1.0.1
new file mode 100644
index 00000000..d42ee5f0
Binary files /dev/null and b/agc_2-X/branches/agc_2.0.4/extras/ip_relay/lib_ip_relay_linux_i386.so.1.0.1 differ
diff --git a/agc_2-X/branches/agc_2.0.4/extras/ip_relay/lib_ip_relay_linux_i386_gcc.a b/agc_2-X/branches/agc_2.0.4/extras/ip_relay/lib_ip_relay_linux_i386_gcc.a
new file mode 100644
index 00000000..05e85be3
Binary files /dev/null and b/agc_2-X/branches/agc_2.0.4/extras/ip_relay/lib_ip_relay_linux_i386_gcc.a differ
diff --git a/agc_2-X/branches/agc_2.0.4/extras/ip_relay/relay_control b/agc_2-X/branches/agc_2.0.4/extras/ip_relay/relay_control
new file mode 100644
index 00000000..081574e8
--- /dev/null
+++ b/agc_2-X/branches/agc_2.0.4/extras/ip_relay/relay_control
@@ -0,0 +1,59 @@
+#!/bin/sh
+#
+# relay_control      ip_relay startup/shutdown script
+#
+# Version: 1.0     ip_relay/relay_control     7-Feb-2003
+#
+# info@eflo.net
+#
+# This script is released under the BSD license 
+# (for compatibility with the ip_relay project)
+# http://sourceforge.net/projects/iprelay/
+#
+# Thanks to Rachad ALAO (ralao@venus.org) for writing ip_relay
+#
+
+
+case "$1" in
+  start)
+
+        echo "starting up ip_relay services "
+
+        ip_relay 40569 127.0.0.1    4569 9999999 &
+        ip_relay 41569 127.0.0.1    4569 9999999 &
+
+        echo "done "
+        echo
+        ;;
+
+  status)
+
+        echo "current running processes "
+
+        ps -C ip_relay
+
+        echo "Done "
+        exit 0
+        ;;
+
+  restart|reload)
+        $0 stop
+        $0 start
+        ;;
+
+  stop)
+        echo "Shutting down ip_relay services "
+
+        # Turn off IP Forwarding
+        kill `ps -C ip_relay -o pid --no-heading`
+
+        echo "Done "
+
+        echo
+        ;;
+  *)
+        echo "Usage: relay_control {start|stop|status|restart|reload}"
+        exit 1
+esac
+
+exit 0
diff --git a/agc_2-X/branches/agc_2.0.4/install.pl b/agc_2-X/branches/agc_2.0.4/install.pl
index ddc4d079..8e59200f 100644
--- a/agc_2-X/branches/agc_2.0.4/install.pl
+++ b/agc_2-X/branches/agc_2.0.4/install.pl
@@ -2,7 +2,7 @@
 
 # install.pl
 #
-# Copyright (C) 2007  Matt Florell <vicidial@gmail.com>    LICENSE: GPLv2
+# Copyright (C) 2008  Matt Florell <vicidial@gmail.com>    LICENSE: GPLv2
 #
 
 # CHANGES
@@ -10,6 +10,10 @@
 # 71012-1251 - Added PATHDONEmonitor setting
 # 71121-1048 - Added -p flag to mkdir to not show errors
 # 80110-0351 - Added --build_multiserver_conf flag to generate dynamic multi-server conf sections
+# 80330-0327 - Added ip_relay scripts for port forwarding
+#            - Added build_phones_conf flag to generate phones conf entries from phones table records
+#            - Added ip_relay to keepalive list
+#            - Added $PATHlogs/archive for backups
 #
 
 ############################################
@@ -42,7 +46,7 @@ $VARDB_user =	'cron';
 $VARDB_pass =	'1234';
 $VARDB_port =	'3306';
 # default keepalive processes: 
-$VARactive_keepalives =		'123456';
+$VARactive_keepalives =		'1234568';
 # default recording FTP archive variables:
 $VARFTP_host = '10.0.0.4';
 $VARFTP_user = 'cron';
@@ -158,6 +162,7 @@ if (length($ARGV[0])>1)
 	print "     5 - AST_VDadapt (If multi-server system, this must only be on one server)\n";
 	print "     6 - FastAGI_log\n";
 	print "     7 - AST_VDauto_dial_FILL (only for multi-server, this must only be on one server)\n";
+	print "     8 - ip_relay (used for blind agent monitoring)\n";
 	print "  [--copy_sample_conf_files] = copies the sample conf files to /etc/asterisk/\n";
 	print "  [--FTP_host=192.168.0.2] = define recording archive server IP address at runtime\n";
 	print "  [--FTP_user=cron] = define archive server name at runtime\n";
@@ -178,6 +183,7 @@ if (length($ARGV[0])>1)
 	print "  [--fastagi_log_checkfordead=30] = define FastAGI log check-for-dead seconds\n";
 	print "  [--fastagi_log_checkforwait=60] = define FastAGI log check-for-wait seconds\n";
 	print "  [--build_multiserver_conf] = generates conf file examples for extensions.conf and iax.conf\n";
+	print "  [--build_phones_conf] = generates conf file examples for extensions.conf, sip.conf and iax.conf\n";
 	print "\n";
 
 	exit;
@@ -514,6 +520,7 @@ if (length($ARGV[0])>1)
 		{
 		$CLIcopy_conf_files='n';
 		}
+
 		if ($args =~ /--fastagi_log_min_servers=/i) # CLI defined fastagi min servers
 		{
 		@CLIDB_minserARY = split(/--fastagi_log_min_servers=/,$args);
@@ -653,18 +660,20 @@ if (length($ARGV[0])>1)
 			}
 
 		$ext  = "\nAdd the following lines to your extensions.conf file:\n";
+		$ext  .= "TRUNKloop = IAX2/ASTloop:test\@127.0.0.1:40569\n";
+		$ext  .= "TRUNKblind = IAX2/ASTblind:test\@127.0.0.1:41569\n";
 
 		$iax  = "\nAdd the following lines to your iax.conf file:\n";
-		$iax  .= "#register => ASTloop:test\@$server_ip:40569\n";
+		$iax  .= "register => ASTloop:test\@127.0.0.1:40569\n";
+		$iax  .= "register => ASTblind:test\@127.0.0.1:41569\n";
 
 		$Lext  = "\n";
 		$Lext .= "; Local Server: $server_ip\n";
-		$Lext .= "exten => _$VARremDIALstr*8600XXX,1,Goto(default,\${EXTEN:16},1)\n";
-		$Lext .= "exten => _$VARremDIALstr*8600XXX*.,1,Goto(default,\${EXTEN:16},1)\n";
-		$Lext .= "exten => _$VARremDIALstr*78600XXX,1,Goto(default,\${EXTEN:16},1)\n";
-		$Lext .= "exten => _$VARremDIALstr*78600XXX*.,1,Goto(default,\${EXTEN:16},1)\n";
+		$Lext .= "exten => _$VARremDIALstr*.,1,Goto(default,\${EXTEN:16},1)\n";
 		$Lext .= "exten => _8600XXX*.,1,AGI(agi-VDADfixCXFER.agi)\n";
 		$Lext .= "exten => _78600XXX*.,1,AGI(agi-VDADfixCXFER.agi)\n";
+		$Lext .= "; Local blind monitoring\n";
+		$Lext .= "exten => _08600XXX,1,Dial(\${TRUNKblind}/6\${EXTEN:1},55,o)\n";
 
 		$Liax .= "\n";
 		$Liax .= "[ASTloop]\n";
@@ -679,6 +688,19 @@ if (length($ARGV[0])>1)
 		$Liax .= "allow=ulaw\n";
 		$Liax .= "qualify=yes\n";
 
+		$Liax .= "\n";
+		$Liax .= "[ASTblind]\n";
+		$Liax .= "type=friend\n";
+		$Liax .= "accountcode=IAXASTblind\n";
+		$Liax .= "context=default\n";
+		$Liax .= "auth=plaintext\n";
+		$Liax .= "host=dynamic\n";
+		$Liax .= "permit=0.0.0.0/0.0.0.0\n";
+		$Liax .= "secret=test\n";
+		$Liax .= "disallow=all\n";
+		$Liax .= "allow=ulaw\n";
+		$Liax .= "qualify=yes\n";
+
 		##### Get the server_id for this server's server_ip #####
 		$stmtA = "SELECT server_id FROM servers where server_ip='$server_ip';";
 			print "$stmtA\n";
@@ -719,10 +741,7 @@ if (length($ARGV[0])>1)
 			$iax  .= "register => $server_id:test\@$server_ip[$i]:4569\n";
 
 			$Lext .= "; Remote Server VDAD extens: $server_id[$i] $server_ip[$i]\n";
-			$Lext .= "exten => _$VARremDIALstr*8600XXX,1,Dial(\${TRUNK$server_id[$i]}/\${EXTEN:16},55,o)\n";
-			$Lext .= "exten => _$VARremDIALstr*8600XXX*.,1,Dial(\${TRUNK$server_id[$i]}/\${EXTEN:16},55,o)\n";
-			$Lext .= "exten => _$VARremDIALstr*78600XXX,1,Dial(\${TRUNK$server_id[$i]}/\${EXTEN:16},55,o)\n";
-			$Lext .= "exten => _$VARremDIALstr*78600XXX*.,1,Dial(\${TRUNK$server_id[$i]}/\${EXTEN:16},55,o)\n";
+			$Lext .= "exten => _$VARremDIALstr*.,1,Dial(\${TRUNK$server_id[$i]}/\${EXTEN:16},55,o)\n";
 
 			$Liax .= "\n";
 			$Liax .= "[$server_id[$i]]\n";
@@ -745,6 +764,134 @@ if (length($ARGV[0])>1)
 		print "$ext$Lext\n$iax$Liax\n";
 		exit;
 		}
+
+
+		if ($args =~ /--build_phones_conf/i) # CLI defined conf files
+		{
+		$build_phones_conf='y';
+		print "  CLI phones conf gen:        YES\n";
+
+		# default path to astguiclient configuration file:
+		$PATHconf =		'/etc/astguiclient.conf';
+
+		open(conf, "$PATHconf") || die "can't open $PATHconf: $!\n";
+		@conf = <conf>;
+		close(conf);
+		$i=0;
+		foreach(@conf)
+			{
+			$line = $conf[$i];
+			$line =~ s/ |>|\n|\r|\t|\#.*|;.*//gi;
+			if ( ($line =~ /^PATHlogs/) && ($CLIlogs < 1) )
+				{$PATHlogs = $line;   $PATHlogs =~ s/.*=//gi;}
+			if ( ($line =~ /^VARserver_ip/) && ($CLIserver_ip < 1) )
+				{$VARserver_ip = $line;   $VARserver_ip =~ s/.*=//gi;}
+			if ( ($line =~ /^VARDB_server/) && ($CLIDB_server < 1) )
+				{$VARDB_server = $line;   $VARDB_server =~ s/.*=//gi;}
+			if ( ($line =~ /^VARDB_database/) && ($CLIDB_database < 1) )
+				{$VARDB_database = $line;   $VARDB_database =~ s/.*=//gi;}
+			if ( ($line =~ /^VARDB_user/) && ($CLIDB_user < 1) )
+				{$VARDB_user = $line;   $VARDB_user =~ s/.*=//gi;}
+			if ( ($line =~ /^VARDB_pass/) && ($CLIDB_pass < 1) )
+				{$VARDB_pass = $line;   $VARDB_pass =~ s/.*=//gi;}
+			if ( ($line =~ /^VARDB_port/) && ($CLIDB_port < 1) )
+				{$VARDB_port = $line;   $VARDB_port =~ s/.*=//gi;}
+			$i++;
+			}
+
+		# Customized Variables
+		$server_ip = $VARserver_ip;		# Asterisk server IP
+		if (!$VARDB_port) {$VARDB_port='3306';}
+
+		use DBI;	  
+
+		$dbhA = DBI->connect("DBI:mysql:$VARDB_database:$VARDB_server:$VARDB_port", "$VARDB_user", "$VARDB_pass")
+		 or die "Couldn't connect to database: " . DBI->errstr;
+
+		$ext  = "\nAdd the following lines to your extensions.conf file:\n";
+
+		$sip  = "\nAdd the following lines to your sip.conf file:\n";
+
+		$iax  = "\nAdd the following lines to your iax.conf file:\n";
+
+		$vm  = "\nAdd the following lines to your voicemail.conf file:\n";
+
+		##### Get the SIP phone entries #####
+		$stmtA = "SELECT extension,dialplan_number,voicemail_id,pass FROM phones where server_ip='$server_ip' and protocol='SIP';";
+			print "$stmtA\n";
+		$sthA = $dbhA->prepare($stmtA) or die "preparing: ",$dbhA->errstr;
+		$sthA->execute or die "executing: $stmtA ", $dbhA->errstr;
+		$sthArows=$sthA->rows;
+		$i=0;
+		while ($sthArows > $i)
+			{
+			 @aryA = $sthA->fetchrow_array;
+				$extension[$i] =	"$aryA[0]";
+				$dialplan[$i] =		"$aryA[1]";
+				$voicemail[$i] =	"$aryA[2]";
+				$pass[$i] =			"$aryA[3]";
+
+			$ext .= "exten => $dialplan[$i],1,Dial(SIP/$extension[$i])\n";
+			$ext .= "exten => $dialplan[$i],2,Voicemail,u$voicemail[$i]\n";
+
+			$sip .= "\[$extension[$i]\]\n";
+			$sip .= "disallow=all\n";
+			$sip .= "allow=ulaw\n";
+			$sip .= "type=friend\n";
+			$sip .= "username=$extension[$i]\n";
+			$sip .= "secret=$pass[$i]\n";
+			$sip .= "host=dynamic\n";
+			$sip .= "dtmfmode=rfc2833\n";
+			$sip .= "qualify=1000\n";
+			$sip .= "mailbox=$voicemail[$i]\n\n";
+
+			$vm  .= "$voicemail[$i] => $voicemail[$i],$extension[$i] Mailbox\n";
+
+			$i++;
+			}
+		$sthA->finish();
+
+		##### Get the IAX phone entries #####
+		$stmtA = "SELECT extension,dialplan_number,voicemail_id,pass FROM phones where server_ip='$server_ip' and protocol='IAX2';";
+			print "$stmtA\n";
+		$sthA = $dbhA->prepare($stmtA) or die "preparing: ",$dbhA->errstr;
+		$sthA->execute or die "executing: $stmtA ", $dbhA->errstr;
+		$sthArows=$sthA->rows;
+		$i=0;
+		while ($sthArows > $i)
+			{
+			 @aryA = $sthA->fetchrow_array;
+				$extension[$i] =	"$aryA[0]";
+				$dialplan[$i] =		"$aryA[1]";
+				$voicemail[$i] =	"$aryA[2]";
+				$pass[$i] =			"$aryA[3]";
+
+			$ext .= "exten => $dialplan[$i],1,Dial(IAX2/$extension[$i])\n";
+			$ext .= "exten => $dialplan[$i],2,Voicemail,u$voicemail[$i]\n";
+
+			$iax .= "\[$extension[$i]\]\n";
+			$iax .= "disallow=all\n";
+			$iax .= "allow=ulaw\n";
+			$iax .= "context=default\n";
+			$iax .= "type=friend\n";
+			$iax .= "accountcode=$extension[$i]\n";
+			$iax .= "secret=$pass[$i]\n";
+			$iax .= "auth=md5\n";
+			$iax .= "host=dynamic\n";
+			$iax .= "permit=0.0.0.0/0.0.0.0\n";
+			$iax .= "qualify=1000\n";
+			$iax .= "mailbox=$voicemail[$i]\n\n";
+
+			$vm  .= "$voicemail[$i] => $voicemail[$i],$extension[$i] Mailbox\n";
+
+			$i++;
+			}
+		$sthA->finish();
+
+
+		print "$ext\n$sip\n$iax\n$vm\n";
+		exit;
+		}
 	}
 }
 else
@@ -1412,6 +1559,7 @@ else
 			print " 5 - AST_VDadapt (If multi-server system, this must only be on one server)\n";
 			print " 6 - FastAGI_log\n";
 			print " 7 - AST_VDauto_dial_FILL (only for multi-server, this must only be on one server)\n";
+			print " 8 - ip_relay (used for blind agent monitoring)\n";
 			print "Enter active keepalives or press enter for default: [$VARactive_keepalives] ";
 			$PROMPTactive_keepalives = <STDIN>;
 			chomp($PROMPTactive_keepalives);
@@ -1909,7 +2057,7 @@ print conf "VARDB_pass => $VARDB_pass\n";
 print conf "VARDB_port => $VARDB_port\n";
 print conf "\n";
 print conf "# Alpha-Numeric list of the astGUIclient processes to be kept running\n";
-print conf "# (value should be listing of characters with no spaces: 123456)\n";
+print conf "# (value should be listing of characters with no spaces: 1234568)\n";
 print conf "#  X - NO KEEPALIVE PROCESSES (use only if you want none to be keepalive)\n";
 print conf "#  1 - AST_update\n";
 print conf "#  2 - AST_send_listen\n";
@@ -1918,6 +2066,7 @@ print conf "#  4 - AST_VDremote_agents\n";
 print conf "#  5 - AST_VDadapt (If multi-server system, this must only be on one server)\n";
 print conf "#  6 - FastAGI_log\n";
 print conf "#  7 - AST_VDauto_dial_FILL (only for multi-server, this must only be on one server)\n";
+print conf "#  8 - ip_relay (used for blind agent monitoring)\n";
 print conf "VARactive_keepalives => $VARactive_keepalives\n";
 print conf "\n";
 print conf "# FTP recording archive connection information\n";
@@ -1961,9 +2110,16 @@ if ($WEBONLY < 1)
 	`mkdir -p $PATHmonitor`;
 	`mkdir -p $PATHDONEmonitor`;
 	`mkdir -p $PATHDONEmonitor/ORIG`;
+	`mkdir -p $PATHDONEmonitor/GSM`;
+	`mkdir -p $PATHDONEmonitor/MP3`;
+	`mkdir -p $PATHDONEmonitor/OGG`;
+	`mkdir -p $PATHDONEmonitor/FTP`;
 	`chmod -R 0766 $PATHmonitor`;
 	`chmod -R 0766 $PATHDONEmonitor`;
 
+	print "Creating $PATHlogs/archive directory for backups...\n";
+	`mkdir -p $PATHlogs/archive`;
+
 	print "Copying bin scripts to $PATHhome ...\n";
 	`cp -f ./bin/* $PATHhome/`;
 
@@ -1987,6 +2143,19 @@ if ($WEBONLY < 1)
 
 	print "Copying sounds to $PATHsounds...\n";
 	`cp -f ./sounds/* $PATHsounds/`;
+
+	print "Copying ip_relay scripts to $PATHhome...\n";
+	`cp -fR ./extras/ip_relay $PATHhome/`;
+
+	print "Setting ip_relay scripts to executable...\n";
+	`chmod 0755 $PATHhome/ip_relay/relay_control`;
+	`chmod 0755 $PATHhome/ip_relay/ip_relay_linux_i386`;
+	`ln -s $PATHhome/ip_relay/ip_relay_linux_i386 $PATHhome/ip_relay/ip_relay`;
+	`ln -s $PATHhome/ip_relay/ip_relay_linux_i386 /usr/bin/ip_relay`;
+	`ln -s $PATHhome/ip_relay/ip_relay_linux_i386 /usr/local/bin/ip_relay`;
+
+	print "Starting ip_relay port forwarding for IAX on 40569 and 41569\n";
+	`$PATHhome/ip_relay/relay_control start  2>/dev/null 1>&2`;
 	}
 if ($NOWEB < 1)
 	{