git-svn-id: svn://192.168.202.10@2888 3d104415-ff17-0410-8863-d5cf3c621b8a

2018-01-10 18:15:35 +00:00
parent ee3c5097e9
commit b5e1dc0374
55 changed files with 4266 additions and 0 deletions
@@ -0,0 +1,149 @@
+#! /bin/sh
+# Copyright (C) 2018  James Pearson <jamesp@vicidial.com>    LICENSE: AGPLv2
+# All rights reserved.
+#
+# Author: James Pearson <jamesp@vicidial.com
+#
+# /etc/init.d/homersips
+#
+### BEGIN INIT INFO
+# Provides:          homersips
+# Required-Start:    $network $remote_fs
+# Should-Start:      mysql
+# Required-Stop:     $network $remote_fs
+# Should-Stop:       mysql
+# Default-Start:     3 5
+# Default-Stop:      0 1 2 6
+# Short-Description: HomerSIPS
+# Description:       Start OpenSIPS for HOMER SIP capture
+### END INIT INFO
+
+# Check for missing binaries (stale symlinks should not happen)
+# Copy over new opensips binary for homersips if it exists
+HOMERSIPS_BIN=/usr/sbin/homersips
+OPENSIPS_BIN=/usr/sbin/opensips
+OPENMD5=`md5sum ${OPENSIPS_BIN} | awk '{ print $1 }'`
+HOMERMD5=`md5sum ${HOMERSIPS_BIN} | awk '{ print $1 }'`
+if [ $OPENMD5 != $HOMERMD5 ]
+then
+echo "Copying new opensips binary to homersips"
+cp $OPENSIPS_BIN $HOMERSIPS_BIN
+chmod 755 $HOMERSIPS_BIN
+fi
+test -x $HOMERSIPS_BIN || exit 5
+
+# Check for existence of needed config file and read it
+HOMERSIPS_CONFIG=/etc/opensips/homer.cfg
+test -r $HOMERSIPS_CONFIG || exit 6
+#. $HOMERSIPS_CONFIG
+
+# Shell functions sourced from /etc/rc.status:
+#      rc_check         check and set local and overall rc status
+#      rc_status        check and set local and overall rc status
+#      rc_status -v     ditto but be verbose in local rc status
+#      rc_status -v -r  ditto and clear the local rc status
+#      rc_status -s     display "skipped" and exit with status 3
+#      rc_status -u     display "unused" and exit with status 3
+#      rc_failed        set local and overall rc status to failed
+#      rc_failed <num>  set local and overall rc status to <num>
+#      rc_reset         clear local rc status (overall remains)
+#      rc_exit          exit appropriate to overall rc status
+#      rc_active	checks whether a service is activated by symlinks
+#      rc_splash arg    sets the boot splash screen to arg (if active)
+. /etc/rc.status
+
+# Reset status of this service
+rc_reset
+
+# Return values acc. to LSB for all commands but status:
+# 0	  - success
+# 1       - generic or unspecified error
+# 2       - invalid or excess argument(s)
+# 3       - unimplemented feature (e.g. "reload")
+# 4       - user had insufficient privileges
+# 5       - program is not installed
+# 6       - program is not configured
+# 7       - program is not running
+# 8--199  - reserved (8--99 LSB, 100--149 distrib, 150--199 appl)
+# 
+# Note that starting an already running service, stopping
+# or restarting a not-running service as well as the restart
+# with force-reload (in case signaling is not supported) are
+# considered a success.
+
+case "$1" in
+    start)
+	echo -n "Starting HomerSIPS "
+	## Start daemon with startproc(8). If this fails
+	## the return value is set appropriately by startproc.
+	/sbin/startproc $HOMERSIPS_BIN -f $HOMERSIPS_CONFIG
+
+	# Remember status and be verbose
+	rc_status -v
+	;;
+    stop)
+	echo -n "Shutting down HomerSIPS "
+	## Stop daemon with killproc(8) and if this fails
+	## killproc sets the return value according to LSB.
+	/sbin/killproc -TERM $HOMERSIPS_BIN
+
+	# Remember status and be verbose
+	rc_status -v
+	;;
+    restart)
+	## Stop the service and regardless of whether it was
+	## running or not, start it again.
+	$0 stop
+	$0 start
+
+	# Remember status and be quiet
+	rc_status
+	;;
+    force-reload)
+	## Signal the daemon to reload its config. Most daemons
+	## do this on signal 1 (SIGHUP).
+	## If it does not support it, restart.
+
+	echo -n "Reload service OpenSIPS "
+	## Otherwise:
+	$0 stop  &&  $0 start
+
+	# Remember status and be quiet
+	rc_status
+	;;
+    reload)
+	## Like force-reload, but if daemon does not support
+	## signaling, do nothing (!)
+
+	## Otherwise if it does not support reload:
+	rc_failed 3
+
+	# Remember status and be verbose
+	rc_status -v
+	;;
+    status)
+	echo -n "Checking for service HomerSIPS "
+	## Check status with checkproc(8), if process is running
+	## checkproc will return with exit status 0.
+
+	# Return value is slightly different for the status command:
+	# 0 - service up and running
+	# 1 - service dead, but /var/run/  pid  file exists
+	# 2 - service dead, but /var/lock/ lock file exists
+	# 3 - service not running (unused)
+	# 4 - service status unknown :-(
+	# 5--199 reserved (5--99 LSB, 100--149 distro, 150--199 appl.)
+	
+	# NOTE: checkproc returns LSB compliant status values.
+	/sbin/checkproc $HOMERSIPS_BIN
+	# NOTE: rc_status knows that we called this init script with
+	# "status" option and adapts its messages accordingly.
+	# Remember status and be verbose
+	rc_status -v
+	;;
+    *)
+	echo "Usage: $0 {start|stop|status|restart}"
+	exit 1
+	;;
+esac
+rc_exit