diff --git a/agc_2-X/branches/agc_2.0.4/docs/LOAD_BALANCING.txt b/agc_2-X/branches/agc_2.0.4/docs/LOAD_BALANCING.txt
index e1ea0567..f48e31a1 100644
--- a/agc_2-X/branches/agc_2.0.4/docs/LOAD_BALANCING.txt
+++ b/agc_2-X/branches/agc_2.0.4/docs/LOAD_BALANCING.txt
@@ -22,12 +22,12 @@ NOTE: at the bottom of this document are conf examples for a 3 server load balan
 
 
 1. The VICIDIAL/Asterisk servers need to have all of the perl scripts and cron jobs installed on them, except these which only need to be on one of the servers: 
-	- AST_VDhopper.pl
-	- AST_cleanup_agent_log.pl
-	- ADMIN_adjust_GMTnow_on_leads.pl
-	- AST_DB_optimize.pl
-	- AST_VDadapt.pl
-	- AST_VDauto_dial_FILL.pl
+	- AST_VDhopper.pl  (crontab)
+	- AST_cleanup_agent_log.pl  (crontab)
+	- ADMIN_adjust_GMTnow_on_leads.pl  (crontab)
+	- AST_DB_optimize.pl  (crontab)
+	- AST_VDadapt.pl  (defined in /etc/astguiclient.conf)
+	- AST_VDauto_dial_FILL.pl  (defined in /etc/astguiclient.conf)
 
 2. The VARactive_keepalives variable in /etc/astguiclient.conf should have "5" and "7" on only ONE SERVER in your entire dialer setup, the other servers should not have 5 or 7 in that field.
 	#  1 - AST_update
@@ -69,6 +69,8 @@ NOTE: at the bottom of this document are conf examples for a 3 server load balan
 
 
 4. The two servers need to have wildcard extensions assigned to the other server in the dialplan:
+  ## NOTE: the "010*010*010*015" is the IP address of the server as defined in 
+           the /etc/astguiclient.conf file
   SERVER ONE(ASTtest1-10.10.10.15) 
     extensions.conf:
 	[globals]
@@ -148,12 +150,12 @@ NOTE: at the bottom of this document are conf examples for a 3 server load balan
 If you have any questions or problems please post to the astguiclient-users list(link available on the project website)
 
 7. For multi-server VICIDIAL/astGUIclient installations these cron scripts only need to be set up and run on one of the servers:
-- AST_VDhopper.pl
-- AST_cleanup_agent_log.pl
-- ADMIN_adjust_GMTnow_on_leads.pl
-- AST_DB_optimize.pl
-- AST_VDadapt.pl
-- AST_VDauto_dial_FILL.pl
+	- AST_VDhopper.pl  (crontab)
+	- AST_cleanup_agent_log.pl  (crontab)
+	- ADMIN_adjust_GMTnow_on_leads.pl  (crontab)
+	- AST_DB_optimize.pl  (crontab)
+	- AST_VDadapt.pl  (defined in /etc/astguiclient.conf)
+	- AST_VDauto_dial_FILL.pl  (defined in /etc/astguiclient.conf)
 
 8. On all servers but one you should DELETE the following line from your extensions.conf:
 	; prompt recording AGI script, ID is 4321
diff --git a/agc_2-X/trunk/docs/LOAD_BALANCING.txt b/agc_2-X/trunk/docs/LOAD_BALANCING.txt
index 6ff26051..5dd97430 100644
--- a/agc_2-X/trunk/docs/LOAD_BALANCING.txt
+++ b/agc_2-X/trunk/docs/LOAD_BALANCING.txt
@@ -22,12 +22,12 @@ NOTE: at the bottom of this document are conf examples for a 3 server load balan
 
 
 1. The VICIDIAL/Asterisk servers need to have all of the perl scripts and cron jobs installed on them, except these which only need to be on one of the servers: 
-	- AST_VDhopper.pl
-	- AST_cleanup_agent_log.pl
-	- ADMIN_adjust_GMTnow_on_leads.pl
-	- AST_DB_optimize.pl
-	- AST_VDadapt.pl
-	- AST_VDauto_dial_FILL.pl
+	- AST_VDhopper.pl  (crontab)
+	- AST_cleanup_agent_log.pl  (crontab)
+	- ADMIN_adjust_GMTnow_on_leads.pl  (crontab)
+	- AST_DB_optimize.pl  (crontab)
+	- AST_VDadapt.pl  (defined in /etc/astguiclient.conf)
+	- AST_VDauto_dial_FILL.pl  (defined in /etc/astguiclient.conf)
 
 2. The VARactive_keepalives variable in /etc/astguiclient.conf should have "5" and "7" on only ONE SERVER in your entire dialer setup, the other servers should not have 5 or 7 in that field.
 	#  1 - AST_update
@@ -69,7 +69,10 @@ NOTE: at the bottom of this document are conf examples for a 3 server load balan
 	qualify=yes
 
 
-4. The two servers need to have wildcard extensions assigned to the other server in the dialplan:
+4. The two servers need to have wildcard extensions assigned to the other server
+in the dialplan:
+  ## NOTE: the "010*010*010*015" is the IP address of the server as defined in 
+           the /etc/astguiclient.conf file
   SERVER ONE(ASTtest1-10.10.10.15) 
     extensions.conf:
 	[globals]
@@ -168,12 +171,12 @@ NOTE: at the bottom of this document are conf examples for a 3 server load balan
 If you have any questions or problems please post to the astguiclient-users list(link available on the project website)
 
 7. For multi-server VICIDIAL/astGUIclient installations these cron scripts only need to be set up and run on one of the servers:
-- AST_VDhopper.pl
-- AST_cleanup_agent_log.pl
-- ADMIN_adjust_GMTnow_on_leads.pl
-- AST_DB_optimize.pl
-- AST_VDadapt.pl
-- AST_VDauto_dial_FILL.pl
+	- AST_VDhopper.pl  (crontab)
+	- AST_cleanup_agent_log.pl  (crontab)
+	- ADMIN_adjust_GMTnow_on_leads.pl  (crontab)
+	- AST_DB_optimize.pl  (crontab)
+	- AST_VDadapt.pl  (defined in /etc/astguiclient.conf)
+	- AST_VDauto_dial_FILL.pl  (defined in /etc/astguiclient.conf)
 
 8. On all servers but one you should DELETE the following line from your extensions.conf:
 	; prompt recording AGI script, ID is 4321
diff --git a/agc_2-X/trunk/www/vicidial/AST_timeonVDADall.php b/agc_2-X/trunk/www/vicidial/AST_timeonVDADall.php
index 6c0af514..a773a47b 100644
--- a/agc_2-X/trunk/www/vicidial/AST_timeonVDADall.php
+++ b/agc_2-X/trunk/www/vicidial/AST_timeonVDADall.php
@@ -905,6 +905,9 @@ $talking_to_print = mysql_num_rows($rslt);
 		if ($SERVdisplay > 0)	{$SVD = "$G$server_ip$EG | $G$call_server_ip$EG | ";}
 		else	{$SVD = "";}
 
+		$vac_stage='';
+		$vac_campaign='';
+		$INGRP='';
 		if ($CM == 'I') 
 			{
 			$stmt="select campaign_id,stage from vicidial_auto_calls where callerid='$Acallerid[$i]' LIMIT 1;";