diff --git a/agc_2-X/trunk/translations/de_language_admin.txt b/agc_2-X/trunk/translations/de_language_admin.txt index 60442ca3..be978c31 100644 --- a/agc_2-X/trunk/translations/de_language_admin.txt +++ b/agc_2-X/trunk/translations/de_language_admin.txt @@ -1064,7 +1064,7 @@ AGI Output -<\/B> Setting this option to NONE will disable output from all VICID Recording Delay -<\/B> For ALLCALLS and ALLFORCE recording only. This setting will delay the starting of the recording on all calls for the number of seconds specified in this field. Default is 0|Das Notieren verzögert - für ALLCALLS und ALLFORCE nur Aufnahme.Dieser Einstellung Wille verzögert das Beginnen der Aufnahme beiallen Anrufen für die Zahl den Sekunden, die diesbezüglichspezifiziert werden, auffangen. Rückstellung ist 0| Omit Phone Code -<\/B> This field allows you to leave out the phone_code field while dialing within VICIDIAL. For instance if you are dialing in the UK from the UK you would have 44 in as your phone_code field for all leads, but you just want to dial 10 digits in your dialplan extensions.conf to place calls instead of 44 then 10 digits. Default is N|Lassen Sie Telefon-Code aus - dieses fangen erlaubt Ihnen,das phone_code auszulassen auffangen beim Wählen innerhalbVICIDIAL auf. Zum Beispiel wenn Sie in Großbritannien vonGroßbritannien wählen, würden Sie 44 innen haben, wie Ihrphone_code für alle Leitungen auffangen, aber Sie gerade 10Stellen in Ihrem dialplan extensions.conf wählen möchten, um Anrufeanstelle von 44 dann 10 Stellen zu setzen. Rückstellung ist N| Campaign Recording -<\/B> This menu allows you to choose what level of recording is allowed on this campaign. NEVER will disable recording on the client. ONDEMAND is the default and allows the agent to start and stop recording as needed. ALLCALLS will start recording on the client whenever a call is sent to an agent. ALLFORCE will start recording on the client whenever a call is sent to an agent giving the agent no option to stop recording. For ALLCALLS and ALLFORCE there is an option to use the Recording Delay to cut down on very short recordings and recude system load|Kampagne Aufnahme - dieses Menü erlaubt Ihnen, zu wählen, welchesNiveau der Aufnahme auf dieser Kampagne erlaubt wird. NIE sperrtAufnahme auf dem Klienten. ONDEMAND ist die Rückstellung und erlaubtdem Vertreter zu notieren zu beginnen und, zu stoppen, wie gebraucht.ALLCALLS beginnt Aufnahme auf dem Klienten, wann immer ein Anruf zueinem Mittel geschickt wird. ALLFORCE beginnt Aufnahme auf demKlienten, wann immer ein Anruf zu einem Mittel geschickt wird, das demMittel keine Wahl gibt, um zu notieren zu stoppen. Für ALLCALLS undALLFORCE gibt es eine Wahl, zum der Aufnahme zu benutzen verzögert,um unten auf sehr kurze Aufnahmen und recude Anlagen-Belastung zuschneiden| -Dial Method -<\/B> This field is the way to define how dialing is to take place. If MANUAL then the auto_dial_level will be locked at 0 unless Dial Method is changed. If RATIO then the normal dialing a number of lines for Active agents. ADAPT_HARD_LIMIT will dial predictively up to the dropped percentage and then not allow aggressive dialing once the drop limit is reached until the percentage goes down again. ADAPT_TAPERED allows for running over the dropped percentage in the first half of the shift(as defined by call_time selected for campaign) and gets more strict as the shift goes on. ADAPT_AVERAGE tries to maintain an average or the dropped percentage not imposing hard limits as aggressively as the other two methods|Vorwahlknopf-Methode - dieses fangen ist die Weise, wie aufdas Wählen zu definieren, stattfinden soll. Wenn HANDBUCH dann dasauto_dial_level bei 0 verschlossen ist, es sei dennVorwahlknopf-Methode geändert wird. Wenn VERHÄLTNIS dann der Normal,der eine Zeilenzahl für aktive Mittel wählt. ADAPT_HARD_LIMIT wähltpredictively bis zum fallengelassenen Prozentsatz und dann erlaubtnicht das konkurrenzfähige Wählen, sobald die Tropfenbegrenzungerreicht wird, bis der Prozentsatz unten wieder geht. ADAPT_TAPEREDläßt laufenden Überschuß den fallengelassenen Prozentsatz zurHälfte erste der shift(as definiert durch das call_time zu, das fürKampagne) vorgewählt wird und erhält strenger, während dieVerschiebung weitergeht. ADAPT_AVERAGE versucht, einen Durchschnittoder den fallengelassenen Prozentsatz beizubehalten so, diekonkurrenzfähig harte Begrenzungen nicht wie die anderen zweiMethoden auferlegen| +Dial Method -<\/B> This field is the way to define how dialing is to take place. If MANUAL then the auto_dial_level will be locked at 0 unless Dial Method is changed. If RATIO then the normal dialing a number of lines for Active agents. ADAPT_HARD_LIMIT will dial predictively up to the dropped percentage and then not allow aggressive dialing once the drop limit is reached until the percentage goes down again. ADAPT_TAPERED allows for running over the dropped percentage in the first half of the shift -as defined by call_time selected for campaign- and gets more strict as the shift goes on. ADAPT_AVERAGE tries to maintain an average or the dropped percentage not imposing hard limits as aggressively as the other two methods. You cannot change the Auto Dial Level if you are in any of the ADAPT dial methods. Only the Dialer can change the dial level when in predictive dialing mode|Vorwahlknopf-Methode - Dieses fangen ist die Weise, wie auf das Wählen zu definieren, stattfinden soll. Wenn HANDBUCH dann das auto_dial_level bei 0 verschlossen ist, es sei denn Vorwahlknopf-Methode geändert wird. Wenn VERHÄLTNIS dann der Normal, der eine Zeilenzahl für aktive Mittel wählt. ADAPT_HARD_LIMIT wählt predictively bis zum fallengelassenen Prozentsatz und dann erlaubt nicht das konkurrenzfähige Wählen, sobald die Tropfenbegrenzung erreicht wird, bis der Prozentsatz unten wieder geht. ADAPT_TAPERED läßt laufenden Überschuß den fallengelassenen Prozentsatz zur Hälfte erste der Verschiebung zu - wie durch das call_time definiert, das für Kampagne vorgewählt wird und erhält strenger, während die Verschiebung weitergeht. ADAPT_AVERAGE versucht, einen Durchschnitt oder den fallengelassenen Prozentsatz beizubehalten so, die konkurrenzfähig harte Begrenzungen nicht wie die anderen zwei Methoden auferlegen. Sie können nicht das Selbstvorwahlknopf-Niveau ändern, wenn Sie in irgendwelchen der ANPASSENVORWAHLKNOPFMETHODEN sind. Nur der Dialer kann das Vorwahlknopfniveau ändern wenn im vorbestimmten wählenden Modus| Available Only Tally -<\/B> This field if set to Y will leave out INCALL and QUEUE status agents when calculating the number of calls to dial when not in MANUAL dial mode. Default is N|Vorhandenes nur Tally - dieses fangen auf, wenn Satz zu YINCALL und WARTESCHLANGE Statusmittel ausläßt, wenn er die ZahlAnrufen zum Vorwahlknopf wenn nicht in MANUELLEN Vorwahlknopfmoduserrechnet. Rückstellung ist N| Drop Percentage Limit -<\/B> This field is where you set the limit of the percentage of dropped calls you would like while using an adaptive-predictive dial method, not MANUAL or RATIO|Tropfen-Prozentsatz-Begrenzung - dieses fangen ist auf, wohinSie die Begrenzung auf den Prozentsatz der fallengelassenen Anrufe,die einstellten Sie beim Verwenden eineranpassungsfähig-vorbestimmten Vorwahlknopfmethode möchten, nichtMANUELL oder des VERHÄLTNISSES| Maximum Adapt Dial Level -<\/B> This field is where you set the limit of the limit to the numbr of lines you would like dialed per agent while using an adaptive-predictive dial method, not MANUAL or RATIO. This number can be higher than the Auto Dial Level if your hardware will support it. Value must be a positive number greater than one and can have decimal places Default 3.0|Maximum paßt den waagerecht ausgerichteten Vorwahlknopf an - diesesfangen ist auf, wohin Sie die Begrenzung auf die Begrenzungauf das numbr der Linien, die einstellten Sie gewählt pro Mittel beimVerwenden einer anpassungsfähig-vorbestimmten Vorwahlknopfmethodemöchten, nicht MANUELL oder des VERHÄLTNISSES. Diese Zahl kann alsdas Selbstvorwahlknopf-Niveau höher sein, wenn Ihre Kleinteile esstützen. Wert muß eine positive Nr. grösser als eine sein und kannDezimalstellen Rückstellung 3.0 haben| diff --git a/agc_2-X/trunk/translations/el_language_admin.txt b/agc_2-X/trunk/translations/el_language_admin.txt index 9922a466..fa447c06 100644 --- a/agc_2-X/trunk/translations/el_language_admin.txt +++ b/agc_2-X/trunk/translations/el_language_admin.txt @@ -1071,7 +1071,7 @@ AGI Output -<\/B> Setting this option to NONE will disable output from all VICID Recording Delay -<\/B> For ALLCALLS and ALLFORCE recording only. This setting will delay the starting of the recording on all calls for the number of seconds specified in this field. Default is 0|Καθυστέρηση καταγραφής - για την καταγραφή ALLCALLS καιALLFORCE μόνο. Αυτή η ρύθμιση θα καθυστερήσει την έναρξη τηςκαταγραφής σε όλες τις κλήσεις για τον αριθμό δευτερολέπτων πουδιευκρινίζονται σε αυτόν τον τομέα. Η προεπιλογή είναι 0| Omit Phone Code -<\/B> This field allows you to leave out the phone_code field while dialing within VICIDIAL. For instance if you are dialing in the UK from the UK you would have 44 in as your phone_code field for all leads, but you just want to dial 10 digits in your dialplan extensions.conf to place calls instead of 44 then 10 digits. Default is N|Παραλείψτε τον τηλεφωνικό κώδικα - αυτός ο τομέας επιτρέπει σεσας για να αφήσει έξω τον τομέα phone_code σχηματίζοντας μέσασε VICIDIAL. Παραδείγματος χάριν εάν σχηματίζετε στο UK απότο UK θα είχατε 44 μέσα ως τομέα phone_code σας για όλουςτους μολύβδους, αλλά θέλετε ακριβώς να σχηματίσετε 10 ψηφία σεdialplan extensions.conf σας για να τοποθετήσετε τις κλήσειςαντί 44 έπειτα 10 ψηφίων. Η προεπιλογή είναι ν| Campaign Recording -<\/B> This menu allows you to choose what level of recording is allowed on this campaign. NEVER will disable recording on the client. ONDEMAND is the default and allows the agent to start and stop recording as needed. ALLCALLS will start recording on the client whenever a call is sent to an agent. ALLFORCE will start recording on the client whenever a call is sent to an agent giving the agent no option to stop recording. For ALLCALLS and ALLFORCE there is an option to use the Recording Delay to cut down on very short recordings and recude system load|Καταγραφή εκστρατείας - αυτές οι επιλογές επιτρέπουν σε σας γιανα επιλέξουν ποιο επίπεδο καταγραφής επιτρέπεται σε αυτήν τηνεκστρατεία. Δεν θα θέσει εκτός λειτουργίας ΠΟΤΕ την καταγραφήστον πελάτη. ONDEMAND είναι η προεπιλογή και επιτρέπει στονπράκτορα για να αρχίσει και να σταματήσει όπως απαιτείται.ALLCALLS θα αρχίσει την καταγραφή στον πελάτη όποτε μια κλήσηστέλνεται σε έναν πράκτορα. ALLFORCE θα αρχίσει την καταγραφήστον πελάτη όποτε μια κλήση στέλνεται σε έναν πράκτορα που δενδίνει στον πράκτορα καμία επιλογή να σταματήσει. Για ALLCALLSκαι ALLFORCE υπάρχει μια επιλογή να χρησιμοποιηθεί ηκαθυστέρηση καταγραφής για να περικόψει στις πολύ σύντομακαταγραφές και recude το φορτίο συστημάτων| -Dial Method -<\/B> This field is the way to define how dialing is to take place. If MANUAL then the auto_dial_level will be locked at 0 unless Dial Method is changed. If RATIO then the normal dialing a number of lines for Active agents. ADAPT_HARD_LIMIT will dial predictively up to the dropped percentage and then not allow aggressive dialing once the drop limit is reached until the percentage goes down again. ADAPT_TAPERED allows for running over the dropped percentage in the first half of the shift(as defined by call_time selected for campaign) and gets more strict as the shift goes on. ADAPT_AVERAGE tries to maintain an average or the dropped percentage not imposing hard limits as aggressively as the other two methods|Μέθοδος πινάκων - αυτός ο τομέας είναι ο τρόπος να καθοριστείπώς ο σχηματισμός πρόκειται να πραγματοποιηθεί. Εάν το ΕΓΧΕΙΡΙΔΙΟέπειτα το auto_dial_level θα κλειδωθεί σε 0 εκτός αν τημέθοδο πινάκων αλλάζουν. Εάν ΑΝΑΛΟΓΙΑ έπειτα ο κανονικόςσχηματίζοντας διάφορες γραμμές για τους ενεργούς πράκτορες.ADAPT_HARD_LIMIT θα σχηματίσει predictively μέχρι τοπεταγμένο ποσοστό και έπειτα δεν θα επιτρέψει τον επιθετικόσχηματισμό μόλις επιτευχθεί το όριο πτώσης έως ότου πηγαίνειτο ποσοστό κάτω από πάλι. ADAPT_TAPERED επιτρέπει το τρέξιμοπέρα από το πεταγμένο ποσοστό στο πρώτο μισό των shift(as πουκαθορίζονται από το call_time που επιλέγεται για τηνεκστρατεία) και παίρνει ακριβέστερο καθώς η μετατόπισησυνεχίζεται. ADAPT_AVERAGE προσπαθεί να διατηρήσει έναν μέσοόρο ή το πεταγμένο ποσοστό που δεν επιβάλλει τα σκληρά όριατόσο επιθετικά όσο οι άλλες δύο μέθοδοι| +Dial Method -<\/B> This field is the way to define how dialing is to take place. If MANUAL then the auto_dial_level will be locked at 0 unless Dial Method is changed. If RATIO then the normal dialing a number of lines for Active agents. ADAPT_HARD_LIMIT will dial predictively up to the dropped percentage and then not allow aggressive dialing once the drop limit is reached until the percentage goes down again. ADAPT_TAPERED allows for running over the dropped percentage in the first half of the shift -as defined by call_time selected for campaign- and gets more strict as the shift goes on. ADAPT_AVERAGE tries to maintain an average or the dropped percentage not imposing hard limits as aggressively as the other two methods. You cannot change the Auto Dial Level if you are in any of the ADAPT dial methods. Only the Dialer can change the dial level when in predictive dialing mode|Μέθοδος πινάκων - Αυτός ο τομέας είναι ο τρόπος να καθοριστεί πώς ο σχηματισμός πρόκειται να πραγματοποιηθεί. Εάν το ΕΓΧΕΙΡΙΔΙΟ έπειτα το auto_dial_level θα κλειδωθεί σε 0 εκτός αν τη μέθοδο πινάκων αλλάζουν. Εάν ΑΝΑΛΟΓΙΑ έπειτα ο κανονικός σχηματίζοντας διάφορες γραμμές για τους ενεργούς πράκτορες. ADAPT_HARD_LIMIT θα σχηματίσει predictively μέχρι το πεταγμένο ποσοστό και έπειτα δεν θα επιτρέψει τον επιθετικό σχηματισμό μόλις επιτευχθεί το όριο πτώσης έως ότου πηγαίνει το ποσοστό κάτω από πάλι. ADAPT_TAPERED επιτρέπει το τρέξιμο πέρα από το πεταγμένο ποσοστό στο πρώτο μισό της μετατόπισης - όπως καθορίζεται από το call_time που επιλέγεται για την εκστρατεία - και παίρνει ακριβέστερο καθώς η μετατόπιση συνεχίζεται. ADAPT_AVERAGE προσπαθεί να διατηρήσει έναν μέσο όρο ή το πεταγμένο ποσοστό που δεν επιβάλλει τα σκληρά όρια τόσο επιθετικά όσο οι άλλες δύο μέθοδοι. Δεν μπορείτε να αλλάξετε το αυτόματο επίπεδο πινάκων εάν είστε σε οποιεσδήποτε από τις ADAPT μεθόδους πινάκων. Μόνο το Dialer μπορεί να αλλάξει το επίπεδο πινάκων όταν είναι στον προφητικό τρόπο σχηματισμού| Available Only Tally -<\/B> This field if set to Y will leave out INCALL and QUEUE status agents when calculating the number of calls to dial when not in MANUAL dial mode. Default is N|Διαθέσιμος μόνο έλεγχος - αυτός ο τομέας εάν θέστε το Υ θααφήσει έξω τους πράκτορες θέσης INCALL και ΣΕΙΡΏΝ ΑΝΑΜΟΝΉΣκατά την υπολογισμό του αριθμού κλήσεων στον πίνακα όταν όχιστο ΧΕΙΡΩΝΑΚΤΙΚΌ τρόπο πινάκων. Η προεπιλογή είναι ν| Drop Percentage Limit -<\/B> This field is where you set the limit of the percentage of dropped calls you would like while using an adaptive-predictive dial method, not MANUAL or RATIO|Όριο ποσοστού πτώσης - αυτός ο τομέας είναι όπου θέτετε τοόριο του ποσοστού των πεταγμένων κλήσεων που θα θέλατεχρησιμοποιώντας μια προσαρμοστικός-προφητική μέθοδο, μηΧΕΙΡΩΝΑΚΤΙΚΗ ή μια ΑΝΑΛΟΓΙΑ πινάκων| Maximum Adapt Dial Level -<\/B> This field is where you set the limit of the limit to the numbr of lines you would like dialed per agent while using an adaptive-predictive dial method, not MANUAL or RATIO. This number can be higher than the Auto Dial Level if your hardware will support it. Value must be a positive number greater than one and can have decimal places Default 3.0|Το μέγιστο προσαρμόζει το επίπεδο πινάκων - αυτός ο τομέαςείναι όπου θέτετε το όριο του ορίου στο numbr των γραμμών πουθα θέλατε σχηματισμένο ανά πράκτορα χρησιμοποιώντας μιαπροσαρμοστικός-προφητική μέθοδο, μη ΧΕΙΡΩΝΑΚΤΙΚΗ ή μια ΑΝΑΛΟΓΙΑπινάκων. Αυτός ο αριθμός μπορεί να είναι υψηλότερος από τοαυτόματο επίπεδο πινάκων εάν το υλικό σας θα τον υποστηρίξει. Ηαξία πρέπει να είναι ένας θετικός αριθμός μεγαλύτερος από τοένα και μπορεί να έχει την προεπιλογή 3,0 δεκαδικών θέσεων| diff --git a/agc_2-X/trunk/translations/es_language_admin.txt b/agc_2-X/trunk/translations/es_language_admin.txt index 554e581c..83dfa48e 100644 --- a/agc_2-X/trunk/translations/es_language_admin.txt +++ b/agc_2-X/trunk/translations/es_language_admin.txt @@ -1072,7 +1072,7 @@ AGI Output -<\/B> Setting this option to NONE will disable output from all VICID Recording Delay -<\/B> For ALLCALLS and ALLFORCE recording only. This setting will delay the starting of the recording on all calls for the number of seconds specified in this field. Default is 0|La registración retrasa - para la grabación de ALLCALLS y deALLFORCE solamente. Esta voluntad del ajuste retrasa comenzar de lagrabación en todas las llamadas para el número de los segundosespecificados en este campo. El defecto es 0| Omit Phone Code -<\/B> This field allows you to leave out the phone_code field while dialing within VICIDIAL. For instance if you are dialing in the UK from the UK you would have 44 in as your phone_code field for all leads, but you just want to dial 10 digits in your dialplan extensions.conf to place calls instead of 44 then 10 digits. Default is N|Omita el código del teléfono - este campo permite que usted dejehacia fuera el campo del phone_code mientras que marca dentro deVICIDIAL. Por ejemplo si usted está marcando en el Reino Unido delReino Unido usted tendría 44 adentro como su campo del phone_codepara todos los plomos, pero usted apenas desea marcar 10 dígitos ensu extensions.conf dialplan para poner llamadas en vez de 44 entonces10 dígitos. El defecto es N| Campaign Recording -<\/B> This menu allows you to choose what level of recording is allowed on this campaign. NEVER will disable recording on the client. ONDEMAND is the default and allows the agent to start and stop recording as needed. ALLCALLS will start recording on the client whenever a call is sent to an agent. ALLFORCE will start recording on the client whenever a call is sent to an agent giving the agent no option to stop recording. For ALLCALLS and ALLFORCE there is an option to use the Recording Delay to cut down on very short recordings and recude system load|Grabación de la campaña - este menú permite que usted elija quénivel de la grabación se permite en esta campaña. NUNCAinhabilitará la grabación en el cliente. ONDEMAND es el defecto ypermite que el agente comience y pare a registrar según lonecesitado. ALLCALLS comenzará la grabación en el cliente siempreque una llamada se envíe a un agente. ALLFORCE comenzará lagrabación en el cliente siempre que una llamada se envíe a un agenteque no da al agente ninguna opción para parar el registrar. ParaALLCALLS y ALLFORCE hay una opción para utilizar la grabaciónretrasa para reducir en grabaciones y carga de sistema muy cortas delrecude| -Dial Method -<\/B> This field is the way to define how dialing is to take place. If MANUAL then the auto_dial_level will be locked at 0 unless Dial Method is changed. If RATIO then the normal dialing a number of lines for Active agents. ADAPT_HARD_LIMIT will dial predictively up to the dropped percentage and then not allow aggressive dialing once the drop limit is reached until the percentage goes down again. ADAPT_TAPERED allows for running over the dropped percentage in the first half of the shift(as defined by call_time selected for campaign) and gets more strict as the shift goes on. ADAPT_AVERAGE tries to maintain an average or the dropped percentage not imposing hard limits as aggressively as the other two methods|Método del dial - este campo es la manera de definir cómo el marcardebe ocurrir. Si el MANUAL entonces el auto_dial_level es bloqueado en0 a menos que se cambie el método del dial. Si COCIENTE entonces elnormal marcando un número de líneas para los agentes activos.ADAPT_HARD_LIMIT marcará predictively hasta el porcentaje caído ydespués no permitirá marcar agresivo una vez que se alcance ellímite de la gota hasta que va el porcentaje abajo otra vez.ADAPT_TAPERED permite para el excedente de funcionamiento elporcentaje caído por la mitad primer de los shift(as definida por elcall_time seleccionado para la campaña) y consigue más terminantemientras que se enciende la cambio. ADAPT_AVERAGE intenta mantener unpromedio o el porcentaje caído que no impone límites duros tanagresivamente como los otros dos métodos| +Dial Method -<\/B> This field is the way to define how dialing is to take place. If MANUAL then the auto_dial_level will be locked at 0 unless Dial Method is changed. If RATIO then the normal dialing a number of lines for Active agents. ADAPT_HARD_LIMIT will dial predictively up to the dropped percentage and then not allow aggressive dialing once the drop limit is reached until the percentage goes down again. ADAPT_TAPERED allows for running over the dropped percentage in the first half of the shift -as defined by call_time selected for campaign- and gets more strict as the shift goes on. ADAPT_AVERAGE tries to maintain an average or the dropped percentage not imposing hard limits as aggressively as the other two methods. You cannot change the Auto Dial Level if you are in any of the ADAPT dial methods. Only the Dialer can change the dial level when in predictive dialing mode|Método del dial - Este campo es la manera de definir cómo el marcar debe ocurrir. Si el MANUAL entonces el auto_dial_level es bloqueado en 0 a menos que se cambie el método del dial. Si COCIENTE entonces el normal marcando un número de líneas para los agentes activos. ADAPT_HARD_LIMIT marcará predictively hasta el porcentaje caído y después no permitirá marcar agresivo una vez que se alcance el límite de la gota hasta que va el porcentaje abajo otra vez. ADAPT_TAPERED permite para el excedente de funcionamiento el porcentaje caído por la mitad primer de la cambio - según lo definido por el call_time seleccionado para la campaña y consigue más terminante mientras que se enciende la cambio. ADAPT_AVERAGE intenta mantener un promedio o el porcentaje caído que no impone límites duros tan agresivamente como los otros dos métodos. Usted no puede cambiar el nivel auto del dial si usted está en cualesquiera de los métodos del dial del ADAPTAR. Solamente el sintonizador puede cambiar el nivel del dial cuando en modo que marca profético| Available Only Tally -<\/B> This field if set to Y will leave out INCALL and QUEUE status agents when calculating the number of calls to dial when not in MANUAL dial mode. Default is N|Solamente cuenta disponible - este campo si el sistema a Y deja haciafuera los agentes del estado de INCALL y de la COLETA al calcular elnúmero de llamadas al dial cuando no en modo de dial MANUAL. Eldefecto es N| Drop Percentage Limit -<\/B> This field is where you set the limit of the percentage of dropped calls you would like while using an adaptive-predictive dial method, not MANUAL or RATIO|Límite del porcentaje de la gota - este campo es donde usted fijó ellímite del porcentaje de llamadas caídas que usted quisiera mientrasque usaba un método adaptante-profe'tico del dial, NO MANUAL o delCOCIENTE| Maximum Adapt Dial Level -<\/B> This field is where you set the limit of the limit to the numbr of lines you would like dialed per agent while using an adaptive-predictive dial method, not MANUAL or RATIO. This number can be higher than the Auto Dial Level if your hardware will support it. Value must be a positive number greater than one and can have decimal places Default 3.0|El máximo adapta el dial llano - este campo es donde usted fijó ellímite del límite al numbr de líneas que usted quisiera marcado poragente mientras que usaba un método adaptante-profe'tico del dial, NOMANUAL o del COCIENTE. Este número puede ser más alto que el nivelauto del dial si su hardware lo apoya. El valor debe ser un númeropositivo mayor de uno y puede tener defecto 3.0 de los lugaresdecimales|