docs updates
git-svn-id: svn://192.168.202.10@556 3d104415-ff17-0410-8863-d5cf3c621b8a
This commit is contained in:
mattf
@@ -809,8 +809,8 @@ PHASE 4: INSTALLING ASTERISK
|
||||
|
||||
OK, all the prep work is done, now it's time to start having fun with Asterisk.
|
||||
There are two basic ways to install Asterisk, an official release(at the time of
|
||||
this writing the official release is 1.2.14) and the SVN_DEV version(development
|
||||
branch). We recommend using Asterisk 1.2.14. These instructions are how we get
|
||||
this writing the official release is 1.2.16) and the SVN_DEV version(development
|
||||
branch). We recommend using Asterisk 1.2.16. These instructions are how we get
|
||||
our Asterisk system with it's T1 line installed with our 2 SIP VOIP devices and
|
||||
one IAX2 softphone.
|
||||
|
||||
@@ -1638,7 +1638,7 @@ use asterisk;
|
||||
GRANT SELECT on asterisk.phones TO idcheck@'%' IDENTIFIED BY '1234';
|
||||
GRANT SELECT on asterisk.phones TO idcheck@localhost IDENTIFIED BY '1234';
|
||||
|
||||
insert into servers (server_id,server_description,server_ip,active,asterisk_version)values('TESTasterisk','Test install of Asterisk server', '10.10.10.15','Y','1.2.14');
|
||||
insert into servers (server_id,server_description,server_ip,active,asterisk_version)values('TESTasterisk','Test install of Asterisk server', '10.10.10.15','Y','1.2.16');
|
||||
|
||||
insert into server_updater values('10.10.10.15','');
|
||||
|
||||
|
||||
@@ -0,0 +1,108 @@
|
||||
wget http://ftp.isc.org/isc/bind9/9.3.2/bind-9.3.2.tar.gz
|
||||
gunzip bind-9.3.2.tar.gz
|
||||
tar xvf bind-9.3.2.tar
|
||||
cd bind-9.3.2
|
||||
./configure
|
||||
make
|
||||
make install
|
||||
locate -u
|
||||
vi /etc/named.conf
|
||||
vi /var/named/vicimarketing.zone
|
||||
/usr/sbin/named-checkconf
|
||||
/usr/sbin/named-checkzone
|
||||
/usr/sbin/named-checkzone vicimarketing.com /var/named/vicimarketing.zone
|
||||
vi /etc/named.conf
|
||||
vi /etc/resolv.conf
|
||||
/usr/sbin/named -d 9
|
||||
|
||||
To kill named:
|
||||
killall -15 named
|
||||
|
||||
To run testing in foreground:
|
||||
/usr/sbin/named -f -d 9
|
||||
|
||||
|
||||
|
||||
root@ftp:/# cat /var/named/vicimarketing.zone
|
||||
;
|
||||
; Zone file for vicimarketing.com
|
||||
;
|
||||
; The full zone file
|
||||
;
|
||||
$TTL 1H
|
||||
@ IN SOA ftp.vicimarketing.com. sip.vicimarketing.com. (
|
||||
200607101 ; serial#
|
||||
3600 ; refresh, seconds
|
||||
3600 ; retry, seconds
|
||||
3600 ; expire, seconds
|
||||
3600 ) ; minimum, seconds
|
||||
;
|
||||
NS ftp ; Inet Address of nameserver
|
||||
vicimarketing.com. MX 10 email ; Primary Mail Exchanger
|
||||
vicimarketing.com. MX 70 email2 ; Primary Mail Exchanger
|
||||
;
|
||||
localhost A 127.0.0.1
|
||||
@ A 64.31.159.154
|
||||
www A 64.31.159.154
|
||||
www2 A 205.201.151.24
|
||||
email A 205.201.151.23
|
||||
email2 A 68.143.231.202
|
||||
ftp A 205.201.151.22
|
||||
rsc1 A 205.201.151.21
|
||||
annex A 205.201.151.26
|
||||
telcove A 64.31.159.154
|
||||
tc2 A 64.31.159.155
|
||||
codygate A 67.79.161.170
|
||||
viciDB3 A 205.201.151.26
|
||||
exchange A 10.10.10.5
|
||||
ICIast20 CNAME www2
|
||||
VICIast1 CNAME www2
|
||||
app2 CNAME www2
|
||||
cody CNAME codygate
|
||||
sip CNAME ftp
|
||||
gate3 CNAME www2
|
||||
gate2 CNAME www
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
root@ftp:/# cat /etc/named.conf
|
||||
options {
|
||||
directory "/var/named";
|
||||
forwarders { 209.84.253.11; 209.84.253.12; };
|
||||
/*
|
||||
* If there is a firewall between you and nameservers you want
|
||||
* to talk to, you might need to uncomment the query-source
|
||||
* directive below. Previous versions of BIND always asked
|
||||
* questions using port 53, but BIND 8.1 uses an unprivileged
|
||||
* port by default.
|
||||
*/
|
||||
// query-source address * port 53;
|
||||
};
|
||||
|
||||
//
|
||||
// a caching only nameserver config
|
||||
//
|
||||
zone "." IN {
|
||||
type hint;
|
||||
file "caching-example/named.ca";
|
||||
};
|
||||
|
||||
zone "localhost" IN {
|
||||
type master;
|
||||
file "caching-example/localhost.zone";
|
||||
allow-update { none; };
|
||||
};
|
||||
|
||||
zone "0.0.127.in-addr.arpa" IN {
|
||||
type master;
|
||||
file "caching-example/named.local";
|
||||
allow-update { none; };
|
||||
};
|
||||
zone "vicimarketing.com" {
|
||||
type master;
|
||||
notify no;
|
||||
allow-query { any; };
|
||||
file "vicimarketing.zone";
|
||||
};
|
||||
@@ -105,3 +105,5 @@ ALTER TABLE vicidial_campaigns ADD dial_statuses VARCHAR(255) default ' NEW -';
|
||||
update vicidial_campaigns SET dial_statuses=concat_ws(""," ",`dial_status_a`," ",`dial_status_b`," ",`dial_status_c`," ",`dial_status_d`," ",`dial_status_e`," -");
|
||||
|
||||
ALTER TABLE system_settings ADD queuemetrics_eq_prepend VARCHAR(255) default 'NONE';
|
||||
|
||||
|
||||
|
||||
@@ -570,6 +570,9 @@ if (isset($_GET["dial_status"])) {$dial_status=$_GET["dial_status"];}
|
||||
elseif (isset($_POST["dial_status"])) {$dial_status=$_POST["dial_status"];}
|
||||
if (isset($_GET["queuemetrics_eq_prepend"])) {$queuemetrics_eq_prepend=$_GET["queuemetrics_eq_prepend"];}
|
||||
elseif (isset($_POST["queuemetrics_eq_prepend"])) {$queuemetrics_eq_prepend=$_POST["queuemetrics_eq_prepend"];}
|
||||
if (isset($_GET["vicidial_agent_disable"])) {$vicidial_agent_disable=$_GET["vicidial_agent_disable"];}
|
||||
elseif (isset($_POST["vicidial_agent_disable"])) {$vicidial_agent_disable=$_POST["vicidial_agent_disable"];}
|
||||
|
||||
|
||||
if (isset($script_id)) {$script_id= strtoupper($script_id);}
|
||||
if (isset($lead_filter_id)) {$lead_filter_id = strtoupper($lead_filter_id);}
|
||||
@@ -805,6 +808,7 @@ $VICIDIAL_park_on_filename = ereg_replace("[^-\_0-9a-zA-Z]","",$VICIDIAL_park_on
|
||||
$auto_alt_dial = ereg_replace("[^-\_0-9a-zA-Z]","",$auto_alt_dial);
|
||||
$dial_status = ereg_replace("[^-\_0-9a-zA-Z]","",$dial_status);
|
||||
$queuemetrics_eq_prepend = ereg_replace("[^-\_0-9a-zA-Z]","",$queuemetrics_eq_prepend);
|
||||
$vicidial_agent_disable = ereg_replace("[^-\_0-9a-zA-Z]","",$vicidial_agent_disable);
|
||||
|
||||
### ALPHA-NUMERIC and spaces
|
||||
$lead_order = ereg_replace("[^ 0-9a-zA-Z]","",$lead_order);
|
||||
@@ -2822,6 +2826,11 @@ The VICIDIAL basic web-based lead loader is designed simply to take a lead file
|
||||
<BR>
|
||||
<B>QueueMetrics EnterQueue Prepend -</B> This field is used to allow for prepending of one of the vicidial_list data fields in front of the phone number of the customer for customized QueueMetrics reports. Default is NONE to not populate anything.
|
||||
|
||||
<BR>
|
||||
<A NAME="settings-vicidial_agent_disable">
|
||||
<BR>
|
||||
<B>VICIDIAL Agent Disable Display -</B> This field is used to select when to show an agent when their session has been disabled by the system, a manager action or by an external measure. The NOT_ACTIVE setting will disable the message on the agents screen. The LIVE_AGENT setting will only display the disabled message when the agents vicidial_auto_calls record has been removed, such as during a force logout or emergency logout.
|
||||
|
||||
|
||||
<BR><BR><BR><BR><BR><BR><BR><BR>
|
||||
<BR><BR><BR><BR><BR><BR><BR><BR>
|
||||
|
||||
Reference in New Issue
Block a user